Equipo para trabajar metales

Accessory MT2 Live Center Rotary EDM Taper Lathe Equipment 60° 50 HRC 1pc
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*MT2 Precision Rotary EDM Milling Center Taper Metalworking Lathe Tool
*The center of the lathe is a tool that has been ground to a certain extent to accurately position the workpiece on the shaft.
*It has an angle of 60°. The main purpose of the center is to ensure that concentric work is produced. This allows the workpiece to be transferred between machining operations without any loss of precision.
*Parts can be turned on a lathe, sent for quenching and tempering, and then ground between the centers of the cylindrical grinder. The center is also used to support longer workpieces where cutting forces can over deflect the workpiece , thereby reducing the finish and precision of the workpiece.
*The conical part is made of T10 steel with a quenching hardness of 55 to 60 HRC and the main part is made of 40Cr steel with a quenching hardness of 45 to 50 HRC.
*High quality bearing design, using high speed bearings to achieve high precision.
*Dust seals prevent chips from entering the bearings, thus extending service life.
*Designed for lathes in medium and medium load environments.
*Good balance and smoothness for effective steering. Ideal for supporting your work on the tailstock end of the lathe.
Specification:
*Type: MT2
*Material: Tool Steel (T10, 40Cr)
*Accuracy: 0.01
*Angle: 60°
Package Contents:
1 * MT2 Live Center
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Useful Metalworking tools Fractal slotting cutter holder ZQ2020R-3 10Pcs
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*High clamping strength, high impact resistance.
*Suitable for various processing environments, even in very, very bad cast iron processing environments, it has good functions.
*Quick and easy clamping and replacement mode, only a wrench can complete the replacement of blades and gaskets.
* Good rigidity and long service life reduce the user cost of tools.
Specifications:
*Model: ZQ2020R SP300 (3MM)
*cutter handle: 20mm x 20mm
*Total length: 125mm
*Direction: Right hand
*10 carbide blades: SP300 carbide blades
SP300 = 3.0mm width
*Suitable for: hardened steel, stainless steel, alkali steel, caston steel
Package Contents:
1*Turn tool holder
10*hard alloy blade
1*wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Details:
Used for milling cutter of 400R 50-22,KM45-50-22, EMR 50-22, etc.
High quality and brand new.
Shank Size: MT4
Pilot: 22mm
Draw Bar: M16 Metric
Package Contents:
1 * MT4-FMB22 Holder
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Woodworking Machine Reamers 3-12mm HSS Machine Reamer H7 Straight Shank
Features:
*100% brand new and high quality
*Made from high speed steel, these reamer cutters have high hardness.
*Sharp cutting-edge, high cutting ability, high accuracy, long service life.
*Applicable for reaming to mold processing and handicraft processing.
*Widely used for bore machining, installed in drilling machine, milling machine, etc.
*Processed surface of iron, plastic, wood, copper, aluminum and other soft materials.
Specifications:
*Material: High Speed Steel
*Color: Silver
*Size:As picture shown
*Shank Diameter: 3/4/5/6/7/8/9/10/11/12mm
*Precision: H7
*Quantity: 10pcs
Packaging Contents:
10*Machine Reamers
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

GTN-3 SP300 Blade With 20mm Fractal Slotting Cutter Holder ZQ2020R-3 Replacement
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*High clamping strength, high impact resistance.
*Suitable for various processing environments, even in very, very bad cast iron processing environments, it has good functions.
*Quick and easy clamping and replacement mode, only a wrench can complete the replacement of blades and gaskets.
* Good rigidity and long service life reduce the user cost of tools.
Specifications:
*Model: ZQ2020R SP300 (3MM)
*cutter handle: 20mm x 20mm
*Total length: 125mm
*Direction: Right hand
*10 carbide blades: SP300 carbide blades
SP300 = 3.0mm width
*Suitable for: hardened steel, stainless steel, alkali steel, caston steel
Package Contents:
1*Turn tool holder
10*hard alloy blade
1*wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

C08K-SCLCR06 Solid CNC Carbides-Bracket Holder Tungsten Steel Shock Tools CCMT06
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* TS- C08K-SCLCR06 solid carbide bracket (tungsten steel impact tool bracket) CCMT0602
* Strong and sturdy, easy to use
* Model: TS- C08K-SCLCR06
* Size: 08mm(Approx.)
* Minimum Processing Size: 11mm(Approx.)
* Applicable Insert: CCMT0602
* Wrench: T8
* Screw: 2.5 * 6
* Color: As pictures show
* Quantity: 2
Package Contents:
1 * Solid Carbide Bracket
1 * Wrench
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

SER2020K16 Lathe Turning Tool Threading Lathe Turning Tool Boring Bar New Hot
Features:
To maintain tight tolerances unmatched performance.
Accessories steel is good, long life, reducing the user cost of the tool.
High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing.
User clamping and convenient way to replace, only a wrench to complete the replacement of the blade and pad.
Practical and suitable for a variety of processing environments, even in very dirty environments such as cast iron also has good features.
Specification:
Model: SER2020K16
Shank Square Size: 20*20 mm (Approx)
Shank Length: 125 mm (Approx)
Wrench: T15
Inserts Material: Steel
Accept Inserts: 16ER AG60 (10pcs)
Suitable For: Semi-finishing, finishing
Package Contents:
10 * 16ER AG60 Inserts
1 * SER2020K16 Holder
1 * Wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Tungsten Carbide Milling Cutter Ball Nose 5Pcs CAB2-R1.0-5.0 HRC45 Durable
Features:
*5Pcs R1.0 - R5.0 HRC45 Tungsten Carbide Ball Nose End Mills Milling Cutter
*100% brand new and high quality
*Shockproof design, high surface finish and long service life
*Optimized for handling the temperatures and demands of challenging materials such as high temp alloys
*Sharp cutting reasonable matched with high strength of cutter
*Arc back angle makes the tool more wear resistant
Specifications:
*Model: CAB2-R1.0-5.0 HRC45
*Flute: 2 flutes
*Cutting radius: R = 1.0, 2.0, 3.0, 4.0, 5.0 mm
*Cutting diameter: d = 2, 4, 6, 8, 10 MM
*Handle diameter: D = 4, 4, 6, 8, 10 MM
*Cutting head length: L1 = 5.0, 8.0, 12, 14, 18 mm
*Total length: L = 50, 50, 50, 50, 60, 75 MM
*Material: Carbide
*Coating: Aluminium oxide titanium
*Maximum cutting hardness: HRC45 For general steel alloy steel mold steel
Package Contents:
5*Milling Cutter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

359120 Lathe tool holder Facing Milling Turning Cut off Durable Useful
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Use multiple tools to form a manual tool library that can be replaced repeatedly.
*Use the dial to rotate the cutter at any angle of 9° or 9°. Combined with a small carriage, it can handle workpieces at various angles.
*The tool holder is equipped with an adjusting nut to adjust the height of the tool holder. It is easy to operate and shorten the loading time.
*Replace the tool only needs a few seconds.
*Quickly change the tool holder. Once installed, the processing stability is high.
*Fit to for CCMT TCMT milling inserts
Specification:
*Model: 659120
*Color: Black (As pictures show)
*Material: Aluminum Alloy
*Type: Cylindrical Tool Holder
*Size: 49 * 49 * 20mm (Approx.)
*Quantity: 5
Package Contents:
5 * Mini Lathe 1/4" -1/2" Tool Holder
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Quick change Lathe tool holder Cut off Equipment 359120 5pcs 1/4"- 1/2" Mini
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Use multiple tools to form a manual tool library that can be replaced repeatedly.
*Use the dial to rotate the cutter at any angle of 9° or 9°. Combined with a small carriage, it can handle workpieces at various angles.
*The tool holder is equipped with an adjusting nut to adjust the height of the tool holder. It is easy to operate and shorten the loading time.
*Replace the tool only needs a few seconds.
*Quickly change the tool holder. Once installed, the processing stability is high.
*Fit to for CCMT TCMT milling inserts
Specification:
*Model: 659120
*Color: Black (As pictures show)
*Material: Aluminum Alloy
*Type: Cylindrical Tool Holder
*Size: 49 * 49 * 20mm (Approx.)
*Quantity: 5
Package Contents:
5 * Mini Lathe 1/4" -1/2" Tool Holder
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

5pcs Lathe tool holder 359120 Post Mini Facing Milling Turning Durable
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Use multiple tools to form a manual tool library that can be replaced repeatedly.
*Use the dial to rotate the cutter at any angle of 9° or 9°. Combined with a small carriage, it can handle workpieces at various angles.
*The tool holder is equipped with an adjusting nut to adjust the height of the tool holder. It is easy to operate and shorten the loading time.
*Replace the tool only needs a few seconds.
*Quickly change the tool holder. Once installed, the processing stability is high.
*Fit to for CCMT TCMT milling inserts
Specification:
*Model: 659120
*Color: Black (As pictures show)
*Material: Aluminum Alloy
*Type: Cylindrical Tool Holder
*Size: 49 * 49 * 20mm (Approx.)
*Quantity: 5
Package Contents:
5 * Mini Lathe 1/4" -1/2" Tool Holder
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

1/4-1/2 Mini Lathe Quick Change Post Facing Milling Turning Tools Holder 5 Pcs
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Use multiple tools to form a manual tool library that can be replaced repeatedly.
*Use the dial to rotate the cutter at any angle of 9° or 9°. Combined with a small carriage, it can handle workpieces at various angles.
*The tool holder is equipped with an adjusting nut to adjust the height of the tool holder. It is easy to operate and shorten the loading time.
*Replace the tool only needs a few seconds.
*Quickly change the tool holder. Once installed, the processing stability is high.
*Fit to for CCMT TCMT milling inserts
Specification:
*Model: 659120
*Color: Black (As pictures show)
*Material: Aluminum Alloy
*Type: Cylindrical Tool Holder
*Size: 49 * 49 * 20mm (Approx.)
*Quantity: 5
Package Contents:
5 * Mini Lathe 1/4" -1/2" Tool Holder
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Turning Holder Tool Black 51/4-1/2 Mini Lathe Post Facing Milling High Quality
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Use multiple tools to form a manual tool library that can be replaced repeatedly.
*Use the dial to rotate the cutter at any angle of 9° or 9°. Combined with a small carriage, it can handle workpieces at various angles.
*The tool holder is equipped with an adjusting nut to adjust the height of the tool holder. It is easy to operate and shorten the loading time.
*Replace the tool only needs a few seconds.
*Quickly change the tool holder. Once installed, the processing stability is high.
*Fit to for CCMT TCMT milling inserts
Specification:
*Model: 659120
*Color: Black (As pictures show)
*Material: Aluminum Alloy
*Type: Cylindrical Tool Holder
*Size: 49 * 49 * 20mm (Approx.)
*Quantity: 5
Package Contents:
5 * Mini Lathe 1/4" -1/2" Tool Holder
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Features:
*100% brand new and high quality
*Extension rod diameter and the other parts are precision ground to eliminate unbalance, increase safety when cutting
*It can reduce the use of extension tools, reduce costs and improve efficiency
*Spring Collect is highly clamping force, wide clamping range, high accuracy
*Widely used in boring, milling, drilling, tapping, grinding and other processing
Specifications:
*Color: Silver&Black (As Pictures Show)
*Shank chuck model: C16-ER16A-150L
*Shank diameter: 16mm
*Shank length: 150mm
*Spring Collet Model: ER16(10pcs, 1mm,2mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm)
*Spring Collet Length: 27.5mm (Approx.)
*Spring Collet Diameter: 17mm (Approx.)
Package Contents:
1*Straight Shank Chuck
10*Spring Collets
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

CCMT0602 Carbide Insert Blade S07K/S08K/S10K/S12M-SCLCR06 Boring Bar Tool Holder
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Right-hand internal boring bar, with an approach angle of 95 °, for boring and face cutting
* Using 80 ° diamond-shaped CCMT inserts, 5 ° end face and side cutting angle
* Beads for semi-finishing and finishing
* Hardened and tempered tool holders, up to 45HRC, high temperature resistance
* Kit contains inserts, clamping screws and wrenches, ready to use
Specification:
* Tool Material: Steel
* Approach Angle: 95 °
* Insert: CCMT060204
* Insert Material: Carbide
* Model: S07K-SCLCR06, S08K-SCLCR06, S10K-SCLCR06, S12M-SCLCR06
* Insert: CC..0602 .., CC..0602 .., CC..0602 .., CC..0602 ..
* Minimum Starting Hole: 9mm, 10mm, 13mm, 16mm(Approx.)
* Diameter: 8mm, 8mm, 10mm, 12mm(Approx.)
* Height: 7mm, 7mm, 9mm, 11mm(Approx.)
* Length: 125mm, 125mm, 125mm, 150mm(Approx.)
* Screw: M2.5x5, M2.5x6
* Wrench: T8
Package Contents:
1*S07K-SCLCR06 Boring Bar
1*S08K-SCLCR06 Boring Bar
1*S10K-SCLCR06 Boring Bar
1*S12M-SCLCR06 Boring Bar
4*T8 Wrenches
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10pcs Inserts SER2020K16 Lathe Turning Tool Holder Boring 16ER AG60 Supply Set
Features:
To maintain tight tolerances unmatched performance.
Accessories steel is good, long life, reducing the user cost of the tool.
High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing.
User clamping and convenient way to replace, only a wrench to complete the replacement of the blade and pad.
Practical and suitable for a variety of processing environments, even in very dirty environments such as cast iron also has good features.
Specification:
Model: SER2020K16
Shank Square Size: 20*20 mm (Approx)
Shank Length: 125 mm (Approx)
Wrench: T15
Inserts Material: Steel
Accept Inserts: 16ER AG60 (10pcs)
Suitable For: Semi-finishing, finishing
Package Contents:
10 * 16ER AG60 Inserts
1 * SER2020K16 Holder
1 * Wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Inner Turning Tool Holder Thread S06K/S07K/S08K//S10K/S12M-SCLCR06 15pcs
Details:
*100% brand new and high quality.
*5PCS Turning Tool Bore Inner Holder ((S06K/S07K/S08K//S10K/S12M-SCLCR06 1pc each)
*Material: Plastic Carbide
*Color: As Pictures Show
*Quantity: 15 pcs
*Wrench: T7
*Size (Approx.):
Model S06K-SCLCR06: Dimension 6*125mm
Model S07K-SCLCR06: Dimension 7*125mm
Model S08K-SCLCR06: Dimension 8*125mm
Model S10K-SCLCR06: Dimension 10*125mm
Model S12M-SCLCR06: Dimension 12*150mm
Package Contents:
1 * S06K-SCLCR06 Turning Tool Holder
1 * S07K-SCLCR06 Turning Tool Holder
1 * S08K-SCLCR06 Turning Tool Holder
1 * S10K-SCLCR06 Turning Tool Holder
1 * S12M-SCLCR06 Turning Tool Holder
5 * Wrench
5 * Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Inner Turning Tool Holder Metal Bore Boring S06K/S07K/S08K//S10K/S12M-SCLCR06
Details:
*100% brand new and high quality.
*5PCS Turning Tool Bore Inner Holder ((S06K/S07K/S08K//S10K/S12M-SCLCR06 1pc each)
*Material: Plastic Carbide
*Color: As Pictures Show
*Quantity: 15 pcs
*Wrench: T7
*Size (Approx.):
Model S06K-SCLCR06: Dimension 6*125mm
Model S07K-SCLCR06: Dimension 7*125mm
Model S08K-SCLCR06: Dimension 8*125mm
Model S10K-SCLCR06: Dimension 10*125mm
Model S12M-SCLCR06: Dimension 12*150mm
Package Contents:
1 * S06K-SCLCR06 Turning Tool Holder
1 * S07K-SCLCR06 Turning Tool Holder
1 * S08K-SCLCR06 Turning Tool Holder
1 * S10K-SCLCR06 Turning Tool Holder
1 * S12M-SCLCR06 Turning Tool Holder
5 * Wrench
5 * Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

SER2020K16 Lathe Turning Tools Holder Boring Bar 10x 16ER AG60 Carbide Inserts
Features:
To maintain tight tolerances unmatched performance.
Accessories steel is good, long life, reducing the user cost of the tool.
High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing.
User clamping and convenient way to replace, only a wrench to complete the replacement of the blade and pad.
Practical and suitable for a variety of processing environments, even in very dirty environments such as cast iron also has good features.
Specification:
Model: SER2020K16
Shank Square Size: 20*20 mm (Approx)
Shank Length: 125 mm (Approx)
Wrench: T15
Inserts Material: Steel
Accept Inserts: 16ER AG60 (10pcs)
Suitable For: Semi-finishing, finishing
Package Contents:
10 * 16ER AG60 Inserts
1 * SER2020K16 Holder
1 * Wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

T15 Steel Threading Lathe Turning Tool Holder Boring Bar Metalworking Multitool
Features:
To maintain tight tolerances unmatched performance.
Accessories steel is good, long life, reducing the user cost of the tool.
High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing.
User clamping and convenient way to replace, only a wrench to complete the replacement of the blade and pad.
Practical and suitable for a variety of processing environments, even in very dirty environments such as cast iron also has good features.
Specification:
Model: SER2020K16
Shank Square Size: 20*20 mm (Approx)
Shank Length: 125 mm (Approx)
Wrench: T15
Inserts Material: Steel
Accept Inserts: 16ER AG60 (10pcs)
Suitable For: Semi-finishing, finishing
Package Contents:
10 * 16ER AG60 Inserts
1 * SER2020K16 Holder
1 * Wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

New TS-C06K-SCLCR06 Solid Carbide Boring Tool Holder Bar & Wrench For CCMT06 New
Details:
Condition: 100% brand new
Size: 10mm
Minimum Machining Size: 14mm
Suitable Inserts: CCMT0602** (inserts not included)
Wrench: T8
Screw: 2.5*6
Package Contents:
1*C10K-SCLCR06 Holder
1*Wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

T8 CNC Holder CCMT0602 Lathe Turning Tool Boring machining Woodworking
Details:
Condition: 100% brand new
Size: 10mm
Minimum Machining Size: 14mm
Suitable Inserts: CCMT0602** (inserts not included)
Wrench: T8
Screw: 2.5*6
Package Contents:
1*C10K-SCLCR06 Holder
1*Wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

9Pcs/Set Hand Reamers Chucking Straight Reamer Smooth Engineering Accs
Details:
* These chuck can be used to cut metals on the lathe.
* Straight flutes for smooth and accurate holes.
* Reamer for reaming holes can improve the precision of the hole and reduce the surface roughness.
* Precision: H8
* Material: 9crsi alloy tool steel
* Diameter: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm
* Quantity: 9pcs
Package contents:
9* H8 Chucking Straight Hand Reamers
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Metal Hand Reamers Chucking Straight Smooth Shank Reamer Tool Engineering Cutter
Details:
* These chuck can be used to cut metals on the lathe.
* Straight flutes for smooth and accurate holes.
* Reamer for reaming holes can improve the precision of the hole and reduce the surface roughness.
* Precision: H8
* Material: 9crsi alloy tool steel
* Diameter: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm
* Quantity: 9pcs
Package contents:
9* H8 Chucking Straight Hand Reamers
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

9Pcs/Set H8 Chucking Straight Shank Machine Hand Reamers Tool Size 3-16mm Useful
Details:
* These chuck can be used to cut metals on the lathe.
* Straight flutes for smooth and accurate holes.
* Reamer for reaming holes can improve the precision of the hole and reduce the surface roughness.
* Precision: H8
* Material: 9crsi alloy tool steel
* Diameter: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm
* Quantity: 9pcs
Package contents:
9* H8 Chucking Straight Hand Reamers
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

9pcs/set 3-16mm H8 Chucking Straight Shank 9crsi Machine Hand Reamers Supplies
Details:
* These chuck can be used to cut metals on the lathe.
* Straight flutes for smooth and accurate holes.
* Reamer for reaming holes can improve the precision of the hole and reduce the surface roughness.
* Precision: H8
* Material: 9crsi alloy tool steel
* Diameter: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm
* Quantity: 9pcs
Package contents:
9* H8 Chucking Straight Hand Reamers
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Replacement External tool holder Lathe 25*150mm Kit Boring bar Durable
Details:
Model: MCLNL 2525M12
Material: Carbon Steel
Direction: Left Hand
Tool Cutting Edge Angle: 95°
Square Shank (W*H): 250mm*25mm
Overall Length: 150mm
Package Contents:
1 * External Tool Holder
1 * "L" Type Wrench
(inserts not included)
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

MCLNL 25*150mm Index External Lathe Turning Holder For CNMG1204 Insert Blade Kit
Details:
Model: MCLNL 2525M12
Material: Carbon Steel
Direction: Left Hand
Tool Cutting Edge Angle: 95°
Square Shank (W*H): 250mm*25mm
Overall Length: 150mm
Package Contents:
1 * External Tool Holder
1 * "L" Type Wrench
(inserts not included)
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Replacement External tool holder Lathe MCLNL 2525M12 25*150mm Kit Shank
Details:
Model: MCLNL 2525M12
Material: Carbon Steel
Direction: Left Hand
Tool Cutting Edge Angle: 95°
Square Shank (W*H): 250mm*25mm
Overall Length: 150mm
Package Contents:
1 * External Tool Holder
1 * "L" Type Wrench
(inserts not included)
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Turning tool holder Repair SER2525M16 25 X 150mm Inserts Threading Turner
Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Model: SER2525M16
*Inserts Kind:ER16
*Shank Size:25mm*25mm (Approx.)
*Length: 150 mm (Approx.)
*Color: As Pictures Show
Package Contents:
1*Turning tool holder
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2* SER2525M22 Lathe Turning Tool Insert Holder Threading L-Wrench Parts Set Kit
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*SER2525M22 (25 x 150mm) lathe indexing turning tool for 22 ER N60
*Model: SER2525M22
*Applicable Carbidge Insert Size: 22ER
*Total Length: 150mm
*Direction: Right Hand
*Color: Black (As pictures show)
*Note: No Insert Included
Package Contents:
1 * Tool Holder
1 * L-Wrench
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

SER2525M22 25x150mm Lathe Turning Tool Insert Holder With L-Wrench For 22ER N60
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*SER2525M22 (25 x 150mm) lathe indexing turning tool for 22 ER N60
*Model: SER2525M22
*Applicable Carbidge Insert Size: 22ER
*Total Length: 150mm
*Direction: Right Hand
*Color: Black (As pictures show)
*Note: No Insert Included
Package Contents:
1 * Tool Holder
1 * L-Wrench
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Model: MVJNR2525M16
*Tool Cutting edge angle: 93°
*Inserts Kind:VNMG1604 or VN -- -- 1604
*Shank Size:25mm*25mm (Approx.)
*Length: 150 mm (Approx.)
*Color: As Pictures Show
Package Contents:
1*Turning tool holder
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Turning Tool Holder Inner Carbide Plastic Metalworking Supplies Industrial
Details:
*100% brand new and high quality.
*5PCS Turning Tool Bore Inner Holder ((S06K/S07K/S08K//S10K/S12M-SCLCR06 1pc each)
*Material: Plastic Carbide
*Color: As Pictures Show
*Quantity: 15 pcs
*Wrench: T7
*Size (Approx.):
Model S06K-SCLCR06: Dimension 6*125mm
Model S07K-SCLCR06: Dimension 7*125mm
Model S08K-SCLCR06: Dimension 8*125mm
Model S10K-SCLCR06: Dimension 10*125mm
Model S12M-SCLCR06: Dimension 12*150mm
Package Contents:
1 * S06K-SCLCR06 Turning Tool Holder
1 * S07K-SCLCR06 Turning Tool Holder
1 * S08K-SCLCR06 Turning Tool Holder
1 * S10K-SCLCR06 Turning Tool Holder
1 * S12M-SCLCR06 Turning Tool Holder
5 * Wrench
5 * Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

SCLCR 6-12mm Lathe Boring Bar Tunring Metalworking Tool CCMT0602 Insert Cutter
Features:
Profiling bar for semi-finishing and finishing operations.
Bar hardness approximately 45HRC.
Extreme gloss finishing.
Positive 80 degree diamond CCMT06 insert.
Specifications:
Model:SO6K - SCLCR06, SO7K - SCLCR06, SO8K - SCLCR06, S10K - SCLCR06, S12M-SCLCR06
Material:steel
Shank D:SO6K - SCLCR06:6mm/0.23"
SO7H - SCLCR06:7mm/0.27"
SO8K - SCLCR06:8mm/0.31"
S10K - SCLCR06:10mm/0.39"
S12M-SCLCR06:12mm/0.46"
Total L:SO6K - SCLCR06:125mm/4.92"
SO7H - SCLCR06:125mm/4.92"
SO8K - SCLCR06:125mm/4.92"
S10K - SCLCR06:125mm/4.92"
S12M-SCLCR06: 150mm/5.91"
Lead cutting angle:95 degrees
Direction: Right hand
Insert:CCMT060204 HM YBC251
Package content:1*SO6K - SCLCR6 Boring Bar
1*SO7K - SCLCR6 Boring Bar
1*SO8K - SCLCR6 Boring Bar
1*S10K - SCLCR6 Boring Bar
1*S12M-SCLCR6 Boring Bar
5*CCMT060204 HM YBC251 Insert
5*keys

TS- C10K-SCLCR06 Tool Holder Carbide Tungsten Steel CCMT06 & Wrench Part Set Kit
Details:
Condition: 100% brand new
Size: 10mm
Minimum Machining Size: 14mm
Suitable Inserts: CCMT0602** (inserts not included)
Wrench: T8
Screw: 2.5*6
Package Contents:
1*C10K-SCLCR06 Holder
1*Wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

C10K-SCLCR06 Solid Carbide Lathe Inner Turning Tool Boring Bar For CCMT0602-T8
Details:
Condition: 100% brand new
Size: 10mm
Minimum Machining Size: 14mm
Suitable Inserts: CCMT0602** (inserts not included)
Wrench: T8
Screw: 2.5*6
Package Contents:
1*C10K-SCLCR06 Holder
1*Wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

20mm Turning Lathe Blade Kit Tool Holder MWLNR2020K08 10 WNMG0804 Sale
Features:
Blade has high strength, high toughness, stable and durable.
For high hardness materials and cast iron.
Metal surface finishing, good wear resistance.
Practical and a variety of processing environments, even in very dirty environments, such as cast iron also has good features.
Mainly used for steel machining.
High quality and brand new.
Specification:
Material: Stainless Steel
Model: MWLNR2020K08
Overall Length: 125mm/5 inch
Suitable For: Semi-finishing, finishing
Carbide Insert
Model: WNMG080404
Material: Carbide
Size: 16.5*5mm(W* T)
Inner Diameter: 4.8mm
Machining Process: Finishing and semi-finishing
Blade Color: Gold (As Picture Show)
Quantity: 10pcs/box
Package Contents:
1 * MWLNR2020K08 Holder
1 * Wrench
10 * WNMG080404 Carbide Insert
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Boring Bar Plastic Wrench Toolholding Supplies For finishing Industrial
Details:
*100% brand new and high quality.
*Suitable for finishing and semi-finishing
*Material: alloy steel,plastic
*Inserts: DCMT070204
*Model: S12M-SDUCR07 SDJCR1212H07 SDJCL1212H07 SDNCN1212H07
*S12M-SDUCR07:
Shank diameter: approx. 12mm
Overall length: approx. 150mm
Direction: right hand
Min. Bore: 17mm
*SDJCR1212H07:
Shank square diameter: approx. 12mm
Overall length: approx. 100mm
Direction: right hand
*SDJCL1212H07:
Shank square diameter: approx. 12mm
Overall length: approx. 100mm
Direction: left hand
*SDNCN1212H07:
Shank square diameter: approx. 12mm
Overall length: approx. 100mm
Direction: straight
Lead angle: 62.5°
Package Contents:
1*S12M-SDUCR07 Boring Bar
1*SDJCR1212H07 Boring Bar
1*SDJCL1212H07 Boring Bar
1*SDNCN1212H07 Boring Bar
10*DCMT070204 Carbide Inserts
4*Wrench
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

4pcs Lathe Boring Bar Turning Holder Tool With 10pcs DCMT0702 Carbide Inserts
Details:
*100% brand new and high quality.
*Suitable for finishing and semi-finishing
*Material: alloy steel,plastic
*Inserts: DCMT070204
*Model: S12M-SDUCR07 SDJCR1212H07 SDJCL1212H07 SDNCN1212H07
*S12M-SDUCR07:
Shank diameter: approx. 12mm
Overall length: approx. 150mm
Direction: right hand
Min. Bore: 17mm
*SDJCR1212H07:
Shank square diameter: approx. 12mm
Overall length: approx. 100mm
Direction: right hand
*SDJCL1212H07:
Shank square diameter: approx. 12mm
Overall length: approx. 100mm
Direction: left hand
*SDNCN1212H07:
Shank square diameter: approx. 12mm
Overall length: approx. 100mm
Direction: straight
Lead angle: 62.5°
Package Contents:
1*S12M-SDUCR07 Boring Bar
1*SDJCR1212H07 Boring Bar
1*SDJCL1212H07 Boring Bar
1*SDNCN1212H07 Boring Bar
10*DCMT070204 Carbide Inserts
4*Wrench
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Detail:
*9pcs Shank Boring Bars Set fits for 50mm(2inch ) boring head.
*Perfect used for lathe milling.
*Can be used with 50mm MT3-M12 Morse Taper boring bar(Not included).
*High hardness, high precision and corrosion resistance.
*Item Condition:100% Brand New
*Material:Steel
*Color: As Pictures Show
*Shank diameter:12mm(Approx.)
Package Contents:
1*Shank Boring Bars Set(9pcs)
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

MCLNL 2525M12 Lathe Index External Turning Tool Holder Left Hand LType Wrench
Details:
Model: MCLNL 2525M12
Material: Carbon Steel
Direction: Left Hand
Tool Cutting Edge Angle: 95°
Square Shank (W*H): 250mm*25mm
Overall Length: 150mm
Package Contents:
1 * External Tool Holder
1 * "L" Type Wrench
(inserts not included)
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

External tool holder MCLNL 2525M12 25*150mm Kit Index Turning Durable Industrial
Details:
Model: MCLNL 2525M12
Material: Carbon Steel
Direction: Left Hand
Tool Cutting Edge Angle: 95°
Square Shank (W*H): 250mm*25mm
Overall Length: 150mm
Package Contents:
1 * External Tool Holder
1 * "L" Type Wrench
(inserts not included)
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Turning tool holder Threading 1pc Industrial Tool Parts 25 X 150mm Inserts Useful
Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Model: SER2525M16
*Inserts Kind:ER16
*Shank Size:25mm*25mm (Approx.)
*Length: 150 mm (Approx.)
*Color: As Pictures Show
Package Contents:
1*Turning tool holder
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Turning tool holder Work holding 25 X 150mm Inserts External Useful Durable
Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Model: SER2525M16
*Inserts Kind:ER16
*Shank Size:25mm*25mm (Approx.)
*Length: 150 mm (Approx.)
*Color: As Pictures Show
Package Contents:
1*Turning tool holder
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Right Hand Turning Tool Holder 25x150mm Lathe Threading Black Industrial
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*SER2525M22 (25 x 150mm) lathe indexing turning tool for 22 ER N60
*Model: SER2525M22
*Applicable Carbidge Insert Size: 22ER
*Total Length: 150mm
*Direction: Right Hand
*Color: Black (As pictures show)
*Note: No Insert Included
Package Contents:
1 * Tool Holder
1 * L-Wrench
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Tool Turning Lathe 10 WNMG0804 Carbide Inserts Blade Wrench Latest Useful
Features:
Blade has high strength, high toughness, stable and durable.
For high hardness materials and cast iron.
Metal surface finishing, good wear resistance.
Practical and a variety of processing environments, even in very dirty environments, such as cast iron also has good features.
Mainly used for steel machining.
High quality and brand new.
Specification:
Material: Stainless Steel
Model: MWLNR2020K08
Overall Length: 125mm/5 inch
Suitable For: Semi-finishing, finishing
Carbide Insert
Model: WNMG080404
Material: Carbide
Size: 16.5*5mm(W* T)
Inner Diameter: 4.8mm
Machining Process: Finishing and semi-finishing
Blade Color: Gold (As Picture Show)
Quantity: 10pcs/box
Package Contents:
1 * MWLNR2020K08 Holder
1 * Wrench
10 * WNMG080404 Carbide Insert
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Inserts Turning Lathe Gold Kit Wrench Set Holder MWLNR2020K08 Replaces
Features:
Blade has high strength, high toughness, stable and durable.
For high hardness materials and cast iron.
Metal surface finishing, good wear resistance.
Practical and a variety of processing environments, even in very dirty environments, such as cast iron also has good features.
Mainly used for steel machining.
High quality and brand new.
Specification:
Material: Stainless Steel
Model: MWLNR2020K08
Overall Length: 125mm/5 inch
Suitable For: Semi-finishing, finishing
Carbide Insert
Model: WNMG080404
Material: Carbide
Size: 16.5*5mm(W* T)
Inner Diameter: 4.8mm
Machining Process: Finishing and semi-finishing
Blade Color: Gold (As Picture Show)
Quantity: 10pcs/box
Package Contents:
1 * MWLNR2020K08 Holder
1 * Wrench
10 * WNMG080404 Carbide Insert
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

S20R-MWLNR08 20mm Lathe Turning Tool Holder With 10*WNMG0804 Carbide Insert Kit
Item Details:
*100% Brand new and high quality
*20 mm MWLNR2020K08 lathe tool holder 10 WNMG0804 carbide inserts
*High strength and hardness.
*High blade strength, good toughness, stable and durable, long service life
*Can reduce tool grinding costs and improve cutting efficiency
*Good low temperature impact toughness, improving the surface gloss of the cutting parts.
*Mainly used for steel processing
*Suitable for a variety of processing environments, even in very very bad cast iron processing environment, it also has good functional.
Specification:
*Model: WNMG080404
*Tool holder model: MWLNR2020K08
*Material: Carbide
*Size: 16.5 x 5mm (width * thickness)
*Inner diameter: 4.8mm
*Processing: finishing and semi-finishing
*Blade color: Gold
*Quantities: 10pcs/ Box
Package Contents:
1* Lathe Turning Tool Boring Bar Holder
2*Wrench
10*WNMG080404 Carbide Insert
Notes:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Post Tool Holder Mill Mini Lathe Change Tool Holder For CCMT TCMT Milling Insert
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Use a number of inserts, the formation of artificial library, can be replaced repeatedly folder.
*The use of dial, the thing can be rotated every 9 ° or 9 ° multiple angle, combined with the small carriage, can handle all kinds of angle workpiece.
*Tool holder with adjustment screw nut, adjust the tool height, easy to operate, shorten the loading time.
*A tool change takes only a few seconds.
*Quick change tool holder once installed, high processing stability.
*Fit For CCMT TCMT Milling Insert
Specification:
*Product Name: Mini Lathe 1/4" -1/2" Turning Tool Post Holder For CCMT TCMT Milling Insert
*Model:659120
*Main Color: Black(As pictures show)
*Materials:Iron Brass
*Size:49*49*20mm(Approx.)
Package Contents:
6*Mini Lathe 1/4" -1/2" Turning Tool Post Holder
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.