Suministros metalúrgicos

Description:Features
Quality stainless steel wire brush, can be used in many places, for stubborn stains,
Rust treatment have a good effect kitchen, car, wash stations, etc. can be used
Material: Steel Wire
Colour: Black
length :180mm
Products used
Polish, mill workers, fitter,
Machinery, molds, and other parts manual cleaning and maintenance
Deburring, descaling, remove the oxide layer
Package including
1 x Stainless Steel Wire Brush
SKU:XN765
Preview:

Description:
Mountain Road Bicycle Bike Bottle Holder Accessories 2XScrew 1X6 Angle Wrench
100% brand new, high quality
Material: Stainless steel
Color: silver
Wrench size: 4mm
Quantity: 2pcs screws, 1pcs 6 angle wrench
Appropriate; bicycle water bottle racks, shelves, etc.
Only screws without nuts
Quality first, provide the best service. Customers are our friends.
Stylish design, 100% brand new and high quality!
note:1. For photos, please allow a slight color difference
2. Due to manual measurement, the size may be different
Package Included:1pcs wrench
2pcs screw
SKU:description
100% brand new, high quality
Material: Stainless steel
Color: silver
Wrench size: 4mm
Quantity: 2pcs screws, 1pcs 6 angle wrench
Appropriate; bicycle water bottle racks, shelves, etc.
Only screws without nuts
Quality first, provide the best service. Customers are our friends.
Stylish design, 100% brand new and high quality!
Note:1. For photos, please allow a slight color difference
2. Due to manual measurement, the size may be different
Package Included:1pcs wrench
2pcs screw
SKU:ZXC1645A
Preview:

Description:Features:Please Note : other accessories are not included
100% brand new and high quality
material: stainless steel
Brush wire material: nylon
Length:20cm
Color:black,white
1. A brand-new, unused, unopened.
2. Suitable for Industry.
3.For rust removal and cleaning.
Note:1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Color: as picture
Package Included:
1 set(10 pcs
SKUBRU5280
Preview:

Description:
Item Description
80mm Sander Pad
80mm velcro (hook and loop) sander backing pad.
Ideal for sanding a wide variety of materials
Fitting accessories system means they are designed to be the best fit for your multitool
80mm Sanding Sheets (x60)
40, 60, 80, 120, 180, and 120 grit papers: 10 of each.
PACKAGE CONTENTS:60pcs 80x80mm Mixed grade sanding sheets 40/80/120/180/240 (20 pieces each)
Preview:

description:100% new high quality
Tungsten carbide coatings consist of hundreds of extremely sharps teeth that rapidly remove stock and outlasts hundreds of sandpaper pads.
Tungsten carbide teeth give you a outstanding wear-life.
5/8 inch bore are intended to mount on a standard electric angle grinder.
Color as shown
Type: 3.3 inch diameter 5/8 inch bore shaping disc, 4 inch diameter 5/8 inch bore shaping disc (optional)
Teeth Material: Tungsten Carbide
3.3 inch diameter 5/8 inch bore shaping disc
Diameter: 84mm / 3.3 in
4 inch diameter 5/8 inch bore shaping disc
Diameter: 100mm / 4 in
Uses: Suitable for rapid removal and shaping, especially for convex and concave areas.
Provides rapid material removal, saving your time and effort, suitable for curved work.
Should only be used on non-metals or non-metal materials, suitable for wood and other materials.
Fit for angle grinder and it is easy to operate it.
Packing:1x Angle Grinding Wheel

description:100% new high quality
Tungsten carbide coatings consist of hundreds of extremely sharps teeth that rapidly remove stock and outlasts hundreds of sandpaper pads.
Tungsten carbide teeth give you a outstanding wear-life.
5/8 inch bore are intended to mount on a standard electric angle grinder.
Color as shown
Type: 3.3 inch diameter 5/8 inch bore shaping disc, 4 inch diameter 5/8 inch bore shaping disc (optional)
Teeth Material: Tungsten Carbide
3.3 inch diameter 5/8 inch bore shaping disc
Diameter: 84mm / 3.3 in
4 inch diameter 5/8 inch bore shaping disc
Diameter: 100mm / 4 in
Uses: Suitable for rapid removal and shaping, especially for convex and concave areas.
Provides rapid material removal, saving your time and effort, suitable for curved work.
Should only be used on non-metals or non-metal materials, suitable for wood and other materials.
Fit for angle grinder and it is easy to operate it.
Packing:1x Angle Grinding Wheel

Features:
Made of brass, high hardness and good ductility, strong, quite sturdy and nicely shiny.
Light weight, good thermal conductivity, especially good rust resistance and easy processing.
Better withstand high pressure and high temperature, resist corrosion.
It has good mechanical properties, good machinability, widely used and easy welding.
Suitable for pipeline, model making, model rail and boat, architectural design,engineering, school projects.
Specification:
Material: Brass
Dimension: (please select, Length*inner diameter*outer diameter)
300*1.5*2mm
300*2*3mm
300*5*6mm
300*7*8mm
200*5*6mm
200*2*3mm
Package Contents:
1 * Brass Tube
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features:
Made of brass, high hardness and good ductility, strong, quite sturdy and nicely shiny.
Light weight, good thermal conductivity, especially good rust resistance and easy processing.
Better withstand high pressure and high temperature, resist corrosion.
It has good mechanical properties, good machinability, widely used and easy welding.
Suitable for pipeline, model making, model rail and boat, architectural design,engineering, school projects.
Specification:
Material: Brass
Dimension: (please select, Length*inner diameter*outer diameter)
300*1.5*2mm
300*2*3mm
300*5*6mm
300*7*8mm
200*5*6mm
200*2*3mm
Package Contents:
1 * Brass Tube
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features:
Made of brass, high hardness and good ductility, strong, quite sturdy and nicely shiny.
Light weight, good thermal conductivity, especially good rust resistance and easy processing.
Better withstand high pressure and high temperature, resist corrosion.
It has good mechanical properties, good machinability, widely used and easy welding.
Suitable for pipeline, model making, model rail and boat, architectural design,engineering, school projects.
Specification:
Material: Brass
Dimension: (please select, Length*inner diameter*outer diameter)
300*1.5*2mm
300*2*3mm
300*5*6mm
300*7*8mm
200*5*6mm
200*2*3mm
Package Contents:
1 * Brass Tube
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features:
Made of brass, high hardness and good ductility, strong, quite sturdy and nicely shiny.
Light weight, good thermal conductivity, especially good rust resistance and easy processing.
Better withstand high pressure and high temperature, resist corrosion.
It has good mechanical properties, good machinability, widely used and easy welding.
Suitable for pipeline, model making, model rail and boat, architectural design,engineering, school projects.
Specification:
Material: Brass
Dimension: (please select, Length*inner diameter*outer diameter)
300*1.5*2mm
300*2*3mm
300*5*6mm
300*7*8mm
200*5*6mm
200*2*3mm
Package Contents:
1 * Brass Tube
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features:
Made of brass, high hardness and good ductility, strong, quite sturdy and nicely shiny.
Light weight, good thermal conductivity, especially good rust resistance and easy processing.
Better withstand high pressure and high temperature, resist corrosion.
It has good mechanical properties, good machinability, widely used and easy welding.
Suitable for pipeline, model making, model rail and boat, architectural design,engineering, school projects.
Specification:
Material: Brass
Dimension: (please select, Length*inner diameter*outer diameter)
300*1.5*2mm
300*2*3mm
300*5*6mm
300*7*8mm
200*5*6mm
200*2*3mm
Package Contents:
1 * Brass Tube
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

CNC End Mills Spiral Bit Carbide Extensions Cutter CEL Set Tungsten steel
Item Details:
*100% brand new and high quality
*Suitable for Acrylic, PVC and hard wood
*Shank diameter: 3.175 mm/0.125 inch(Approx)
*Material: Tungsten steel
*Cutting Edge Length: 17 mm/0.67 inch(Approx)
*Cutting Edge Diameter: 3.175 mm/0.125 inch(Approx)
Package Contents:
1*End Mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

1PCS 4-12mm HSS Straight Shank Spiral 4 Flute End Mill Cutter CNC Drill Bit Tool
Features:
*HSS 4 flute straight shank end milling cutter, usually used to be assembled on milling machine
*There are 5 kinds of milling cutters for you to choose: 4/6/8/10/12mm
*Suitable for carved, high-speed machines
*Can milling of copper, aluminum, tool steel, cast iron, etc.
*High toughness, abrasion resistance, high-speed cutting for the high hardness
*Can processing directly or fine processing to the heat treatment mold
*Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time
*Suitable for: Machining of low carbon steel and non-ferrous materials
Specifications:
*Material: HSS-AL
*Color: As Pictures Show
*Type: 4/6/8/10/12mm
*Milling Cutter Dimension
Cutter Diameter
Shank Diameter
Shank Length
Full Length
4mm
6mm
11mm
55mm
6mm
6mm
13mm
57mm
8mm
8mm
19mm
63mm
10mm
10mm
22mm
72mm
12mm
12mm
26mm
83mm
*Weight: 20g (4mm), 30g (6mm), 35g (8mm), 45g (10mm), 50g (12mm) (Approx.)
Package Contents:
1*End Mill Cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1PCS 4-12mm HSS Straight Shank Spiral 4 Flute End Mill Cutter CNC Drill Bit Tool
Features:
*HSS 4 flute straight shank end milling cutter, usually used to be assembled on milling machine
*There are 5 kinds of milling cutters for you to choose: 4/6/8/10/12mm
*Suitable for carved, high-speed machines
*Can milling of copper, aluminum, tool steel, cast iron, etc.
*High toughness, abrasion resistance, high-speed cutting for the high hardness
*Can processing directly or fine processing to the heat treatment mold
*Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time
*Suitable for: Machining of low carbon steel and non-ferrous materials
Specifications:
*Material: HSS-AL
*Color: As Pictures Show
*Type: 4/6/8/10/12mm
*Milling Cutter Dimension
Cutter Diameter
Shank Diameter
Shank Length
Full Length
4mm
6mm
11mm
55mm
6mm
6mm
13mm
57mm
8mm
8mm
19mm
63mm
10mm
10mm
22mm
72mm
12mm
12mm
26mm
83mm
*Weight: 20g (4mm), 30g (6mm), 35g (8mm), 45g (10mm), 50g (12mm) (Approx.)
Package Contents:
1*End Mill Cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1PCS 4-12mm HSS Straight Shank Spiral 4 Flute End Mill Cutter CNC Drill Bit Tool
Features:
*HSS 4 flute straight shank end milling cutter, usually used to be assembled on milling machine
*There are 5 kinds of milling cutters for you to choose: 4/6/8/10/12mm
*Suitable for carved, high-speed machines
*Can milling of copper, aluminum, tool steel, cast iron, etc.
*High toughness, abrasion resistance, high-speed cutting for the high hardness
*Can processing directly or fine processing to the heat treatment mold
*Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time
*Suitable for: Machining of low carbon steel and non-ferrous materials
Specifications:
*Material: HSS-AL
*Color: As Pictures Show
*Type: 4/6/8/10/12mm
*Milling Cutter Dimension
Cutter Diameter
Shank Diameter
Shank Length
Full Length
4mm
6mm
11mm
55mm
6mm
6mm
13mm
57mm
8mm
8mm
19mm
63mm
10mm
10mm
22mm
72mm
12mm
12mm
26mm
83mm
*Weight: 20g (4mm), 30g (6mm), 35g (8mm), 45g (10mm), 50g (12mm) (Approx.)
Package Contents:
1*End Mill Cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1PCS 4-12mm HSS Straight Shank Spiral 4 Flute End Mill Cutter CNC Drill Bit Tool
Features:
*HSS 4 flute straight shank end milling cutter, usually used to be assembled on milling machine
*There are 5 kinds of milling cutters for you to choose: 4/6/8/10/12mm
*Suitable for carved, high-speed machines
*Can milling of copper, aluminum, tool steel, cast iron, etc.
*High toughness, abrasion resistance, high-speed cutting for the high hardness
*Can processing directly or fine processing to the heat treatment mold
*Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time
*Suitable for: Machining of low carbon steel and non-ferrous materials
Specifications:
*Material: HSS-AL
*Color: As Pictures Show
*Type: 4/6/8/10/12mm
*Milling Cutter Dimension
Cutter Diameter
Shank Diameter
Shank Length
Full Length
4mm
6mm
11mm
55mm
6mm
6mm
13mm
57mm
8mm
8mm
19mm
63mm
10mm
10mm
22mm
72mm
12mm
12mm
26mm
83mm
*Weight: 20g (4mm), 30g (6mm), 35g (8mm), 45g (10mm), 50g (12mm) (Approx.)
Package Contents:
1*End Mill Cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1PCS 4-12mm HSS Straight Shank Spiral 4 Flute End Mill Cutter CNC Drill Bit Tool
Features:
*HSS 4 flute straight shank end milling cutter, usually used to be assembled on milling machine
*There are 5 kinds of milling cutters for you to choose: 4/6/8/10/12mm
*Suitable for carved, high-speed machines
*Can milling of copper, aluminum, tool steel, cast iron, etc.
*High toughness, abrasion resistance, high-speed cutting for the high hardness
*Can processing directly or fine processing to the heat treatment mold
*Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time
*Suitable for: Machining of low carbon steel and non-ferrous materials
Specifications:
*Material: HSS-AL
*Color: As Pictures Show
*Type: 4/6/8/10/12mm
*Milling Cutter Dimension
Cutter Diameter
Shank Diameter
Shank Length
Full Length
4mm
6mm
11mm
55mm
6mm
6mm
13mm
57mm
8mm
8mm
19mm
63mm
10mm
10mm
22mm
72mm
12mm
12mm
26mm
83mm
*Weight: 20g (4mm), 30g (6mm), 35g (8mm), 45g (10mm), 50g (12mm) (Approx.)
Package Contents:
1*End Mill Cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

3mm 1/8 Shank 4Flute Spiral Bit End Mill Cutter Tool For Acrylic, PVC,hard Wood
Details:
Shank Diameter: 3.175 mm/ 0.125''
Cutting Edge Length: 17 mm/ 0.67'' (Approx)
Cutting Edge Diameter: 3.175 mm/ 0.125'' (Approx)
Suitable for Acrylic, PVC and hard wood
Material: Tungsten Steel
Package Contents:
1 * 4 Flute Spiral Bit
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

5X 4mm-12mm Steel CNC 4 Flute End Mill Hole Cutter Drill Bit Milling Tool Set
Features:
*HSS 4 flute straight shank end milling cutter, usually used to be assembled on milling machine
*There are 5 kinds of milling cutters for you to choose: 4/6/8/10/12mm
*Suitable for carved, high-speed machines
*Can milling of copper, aluminum, tool steel, cast iron, etc.
*High toughness, abrasion resistance, high-speed cutting for the high hardness
*Can processing directly or fine processing to the heat treatment mold
*Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time
*Suitable for: Machining of low carbon steel and non-ferrous materials
Specifications:
*Material: HSS-AL
*Color: As Pictures Show
*Type: 4/6/8/10/12mm
*Milling Cutter Dimension
Cutter Diameter
Shank Diameter
Shank Length
Full Length
4mm
6mm
11mm
55mm
6mm
6mm
13mm
57mm
8mm
8mm
19mm
63mm
10mm
10mm
22mm
72mm
12mm
12mm
26mm
83mm
*Weight: 20g (4mm), 30g (6mm), 35g (8mm), 45g (10mm), 50g (12mm) (Approx.)
Package Contents:
1*End Mill Cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

5X 4mm-12mm Steel CNC 4 Flute End Mill Hole Cutter Drill Bit Milling Tool Set
Features:
*HSS 4 flute straight shank end milling cutter, usually used to be assembled on milling machine
*There are 5 kinds of milling cutters for you to choose: 4/6/8/10/12mm
*Suitable for carved, high-speed machines
*Can milling of copper, aluminum, tool steel, cast iron, etc.
*High toughness, abrasion resistance, high-speed cutting for the high hardness
*Can processing directly or fine processing to the heat treatment mold
*Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time
*Suitable for: Machining of low carbon steel and non-ferrous materials
Specifications:
*Material: HSS-AL
*Color: As Pictures Show
*Type: 4/6/8/10/12mm
*Milling Cutter Dimension
Cutter Diameter
Shank Diameter
Shank Length
Full Length
4mm
6mm
11mm
55mm
6mm
6mm
13mm
57mm
8mm
8mm
19mm
63mm
10mm
10mm
22mm
72mm
12mm
12mm
26mm
83mm
*Weight: 20g (4mm), 30g (6mm), 35g (8mm), 45g (10mm), 50g (12mm) (Approx.)
Package Contents:
1*End Mill Cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

5X 4mm-12mm Steel CNC 4 Flute End Mill Hole Cutter Drill Bit Milling Tool Set
Features:
*HSS 4 flute straight shank end milling cutter, usually used to be assembled on milling machine
*There are 5 kinds of milling cutters for you to choose: 4/6/8/10/12mm
*Suitable for carved, high-speed machines
*Can milling of copper, aluminum, tool steel, cast iron, etc.
*High toughness, abrasion resistance, high-speed cutting for the high hardness
*Can processing directly or fine processing to the heat treatment mold
*Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time
*Suitable for: Machining of low carbon steel and non-ferrous materials
Specifications:
*Material: HSS-AL
*Color: As Pictures Show
*Type: 4/6/8/10/12mm
*Milling Cutter Dimension
Cutter Diameter
Shank Diameter
Shank Length
Full Length
4mm
6mm
11mm
55mm
6mm
6mm
13mm
57mm
8mm
8mm
19mm
63mm
10mm
10mm
22mm
72mm
12mm
12mm
26mm
83mm
*Weight: 20g (4mm), 30g (6mm), 35g (8mm), 45g (10mm), 50g (12mm) (Approx.)
Package Contents:
1*End Mill Cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

5X 4mm-12mm Steel CNC 4 Flute End Mill Hole Cutter Drill Bit Milling Tool Set
Features:
*HSS 4 flute straight shank end milling cutter, usually used to be assembled on milling machine
*There are 5 kinds of milling cutters for you to choose: 4/6/8/10/12mm
*Suitable for carved, high-speed machines
*Can milling of copper, aluminum, tool steel, cast iron, etc.
*High toughness, abrasion resistance, high-speed cutting for the high hardness
*Can processing directly or fine processing to the heat treatment mold
*Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time
*Suitable for: Machining of low carbon steel and non-ferrous materials
Specifications:
*Material: HSS-AL
*Color: As Pictures Show
*Type: 4/6/8/10/12mm
*Milling Cutter Dimension
Cutter Diameter
Shank Diameter
Shank Length
Full Length
4mm
6mm
11mm
55mm
6mm
6mm
13mm
57mm
8mm
8mm
19mm
63mm
10mm
10mm
22mm
72mm
12mm
12mm
26mm
83mm
*Weight: 20g (4mm), 30g (6mm), 35g (8mm), 45g (10mm), 50g (12mm) (Approx.)
Package Contents:
1*End Mill Cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

5X 4mm-12mm Steel CNC 4 Flute End Mill Hole Cutter Drill Bit Milling Tool Set
Features:
*HSS 4 flute straight shank end milling cutter, usually used to be assembled on milling machine
*There are 5 kinds of milling cutters for you to choose: 4/6/8/10/12mm
*Suitable for carved, high-speed machines
*Can milling of copper, aluminum, tool steel, cast iron, etc.
*High toughness, abrasion resistance, high-speed cutting for the high hardness
*Can processing directly or fine processing to the heat treatment mold
*Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time
*Suitable for: Machining of low carbon steel and non-ferrous materials
Specifications:
*Material: HSS-AL
*Color: As Pictures Show
*Type: 4/6/8/10/12mm
*Milling Cutter Dimension
Cutter Diameter
Shank Diameter
Shank Length
Full Length
4mm
6mm
11mm
55mm
6mm
6mm
13mm
57mm
8mm
8mm
19mm
63mm
10mm
10mm
22mm
72mm
12mm
12mm
26mm
83mm
*Weight: 20g (4mm), 30g (6mm), 35g (8mm), 45g (10mm), 50g (12mm) (Approx.)
Package Contents:
1*End Mill Cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Kit End Mill Cutter Straight Shank Tools Drill High-speed High Quailty
Features:
*HSS 4 flute straight shank end milling cutter, usually used to be assembled on milling machine
*There are 5 kinds of milling cutters for you to choose: 4/6/8/10/12mm
*Suitable for carved, high-speed machines
*Can milling of copper, aluminum, tool steel, cast iron, etc.
*High toughness, abrasion resistance, high-speed cutting for the high hardness
*Can processing directly or fine processing to the heat treatment mold
*Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time
*Suitable for: Machining of low carbon steel and non-ferrous materials
Specifications:
*Material: HSS-AL
*Color: As Pictures Show
*Type: 4/6/8/10/12mm
*Milling Cutter Dimension
Cutter Diameter
Shank Diameter
Shank Length
Full Length
4mm
6mm
11mm
55mm
6mm
6mm
13mm
57mm
8mm
8mm
19mm
63mm
10mm
10mm
22mm
72mm
12mm
12mm
26mm
83mm
*Weight: 20g (4mm), 30g (6mm), 35g (8mm), 45g (10mm), 50g (12mm) (Approx.)
Package Contents:
1*End Mill Cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Kit End Mill Cutter Straight Shank Tools Drill High-speed High Quailty
Features:
*HSS 4 flute straight shank end milling cutter, usually used to be assembled on milling machine
*There are 5 kinds of milling cutters for you to choose: 4/6/8/10/12mm
*Suitable for carved, high-speed machines
*Can milling of copper, aluminum, tool steel, cast iron, etc.
*High toughness, abrasion resistance, high-speed cutting for the high hardness
*Can processing directly or fine processing to the heat treatment mold
*Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time
*Suitable for: Machining of low carbon steel and non-ferrous materials
Specifications:
*Material: HSS-AL
*Color: As Pictures Show
*Type: 4/6/8/10/12mm
*Milling Cutter Dimension
Cutter Diameter
Shank Diameter
Shank Length
Full Length
4mm
6mm
11mm
55mm
6mm
6mm
13mm
57mm
8mm
8mm
19mm
63mm
10mm
10mm
22mm
72mm
12mm
12mm
26mm
83mm
*Weight: 20g (4mm), 30g (6mm), 35g (8mm), 45g (10mm), 50g (12mm) (Approx.)
Package Contents:
1*End Mill Cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Kit End Mill Cutter Straight Shank Tools Drill High-speed High Quailty
Features:
*HSS 4 flute straight shank end milling cutter, usually used to be assembled on milling machine
*There are 5 kinds of milling cutters for you to choose: 4/6/8/10/12mm
*Suitable for carved, high-speed machines
*Can milling of copper, aluminum, tool steel, cast iron, etc.
*High toughness, abrasion resistance, high-speed cutting for the high hardness
*Can processing directly or fine processing to the heat treatment mold
*Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time
*Suitable for: Machining of low carbon steel and non-ferrous materials
Specifications:
*Material: HSS-AL
*Color: As Pictures Show
*Type: 4/6/8/10/12mm
*Milling Cutter Dimension
Cutter Diameter
Shank Diameter
Shank Length
Full Length
4mm
6mm
11mm
55mm
6mm
6mm
13mm
57mm
8mm
8mm
19mm
63mm
10mm
10mm
22mm
72mm
12mm
12mm
26mm
83mm
*Weight: 20g (4mm), 30g (6mm), 35g (8mm), 45g (10mm), 50g (12mm) (Approx.)
Package Contents:
1*End Mill Cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Kit End Mill Cutter Straight Shank Tools Drill High-speed High Quailty
Features:
*HSS 4 flute straight shank end milling cutter, usually used to be assembled on milling machine
*There are 5 kinds of milling cutters for you to choose: 4/6/8/10/12mm
*Suitable for carved, high-speed machines
*Can milling of copper, aluminum, tool steel, cast iron, etc.
*High toughness, abrasion resistance, high-speed cutting for the high hardness
*Can processing directly or fine processing to the heat treatment mold
*Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time
*Suitable for: Machining of low carbon steel and non-ferrous materials
Specifications:
*Material: HSS-AL
*Color: As Pictures Show
*Type: 4/6/8/10/12mm
*Milling Cutter Dimension
Cutter Diameter
Shank Diameter
Shank Length
Full Length
4mm
6mm
11mm
55mm
6mm
6mm
13mm
57mm
8mm
8mm
19mm
63mm
10mm
10mm
22mm
72mm
12mm
12mm
26mm
83mm
*Weight: 20g (4mm), 30g (6mm), 35g (8mm), 45g (10mm), 50g (12mm) (Approx.)
Package Contents:
1*End Mill Cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Kit End Mill Cutter Straight Shank Tools Drill High-speed High Quailty
Features:
*HSS 4 flute straight shank end milling cutter, usually used to be assembled on milling machine
*There are 5 kinds of milling cutters for you to choose: 4/6/8/10/12mm
*Suitable for carved, high-speed machines
*Can milling of copper, aluminum, tool steel, cast iron, etc.
*High toughness, abrasion resistance, high-speed cutting for the high hardness
*Can processing directly or fine processing to the heat treatment mold
*Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time
*Suitable for: Machining of low carbon steel and non-ferrous materials
Specifications:
*Material: HSS-AL
*Color: As Pictures Show
*Type: 4/6/8/10/12mm
*Milling Cutter Dimension
Cutter Diameter
Shank Diameter
Shank Length
Full Length
4mm
6mm
11mm
55mm
6mm
6mm
13mm
57mm
8mm
8mm
19mm
63mm
10mm
10mm
22mm
72mm
12mm
12mm
26mm
83mm
*Weight: 20g (4mm), 30g (6mm), 35g (8mm), 45g (10mm), 50g (12mm) (Approx.)
Package Contents:
1*End Mill Cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Tungsten steel End Mills 1pc Acrylic PVC 1/8" Shank Handtool Extensions
Item Details:
*100% brand new and high quality
*Suitable for Acrylic, PVC and hard wood
*Shank diameter: 3.175 mm/0.125 inch(Approx)
*Material: Tungsten steel
*Cutting Edge Length: 17 mm/0.67 inch(Approx)
*Cutting Edge Diameter: 3.175 mm/0.125 inch(Approx)
Package Contents:
1*End Mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

17mm End Mills Tungsten steel 1pc Handtool Carbide Bit Cutter Tool 3mm
Item Details:
*100% brand new and high quality
*Suitable for Acrylic, PVC and hard wood
*Shank diameter: 3.175 mm/0.125 inch(Approx)
*Material: Tungsten steel
*Cutting Edge Length: 17 mm/0.67 inch(Approx)
*Cutting Edge Diameter: 3.175 mm/0.125 inch(Approx)
Package Contents:
1*End Mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

3.175 * 17mm Four-blade Helical Milling Tungsten Steel Cutter 4 Flute Spiral Bit
Details:
Shank Diameter: 3.175 mm/ 0.125''
Cutting Edge Length: 17 mm/ 0.67'' (Approx)
Cutting Edge Diameter: 3.175 mm/ 0.125'' (Approx)
Suitable for Acrylic, PVC and hard wood
Material: Tungsten Steel
Package Contents:
1 * 4 Flute Spiral Bit
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Supplies End Mill Radius 4mm Cutter Milling 3 Flute Router Accessories
Features:
*1/8" Helical Milling Cutting Cutter 3 Flute Router Bit For Acrylic Wood Plastic
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Using precise machine tool grinding out the unique spiral blade angle, improve sharpness
*Design of oversized spiral and discharge chips, to prevent sticking blade, raising production efficiency
*High concentricity, non-stick crumbs, not black, increase the speed
*Suitable for acrylic, PVC, wood and other materials
Specifications:
*Material: Metal
*Color: Sliver(As pictures show)
*Cutter Dimension: 22*3.175mm(1/8")(Approx.)
*Overall Length: 38mm/1.5inch(Approx.)
Package Contents:
1*Milling Cutter
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Supplies End Mill Radius Cutter Milling 3 Flute Parts 1/8" Accessories
Features:
*1/8" Helical Milling Cutting Cutter 3 Flute Router Bit For Acrylic Wood Plastic
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Using precise machine tool grinding out the unique spiral blade angle, improve sharpness
*Design of oversized spiral and discharge chips, to prevent sticking blade, raising production efficiency
*High concentricity, non-stick crumbs, not black, increase the speed
*Suitable for acrylic, PVC, wood and other materials
Specifications:
*Material: Metal
*Color: Sliver(As pictures show)
*Cutter Dimension: 22*3.175mm(1/8")(Approx.)
*Overall Length: 38mm/1.5inch(Approx.)
Package Contents:
1*Milling Cutter
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

4mm End Mill Shank Cutter Milling 3 Flute Parts Router 1/8" Accessories CNC
Features:
*1/8" Helical Milling Cutting Cutter 3 Flute Router Bit For Acrylic Wood Plastic
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Using precise machine tool grinding out the unique spiral blade angle, improve sharpness
*Design of oversized spiral and discharge chips, to prevent sticking blade, raising production efficiency
*High concentricity, non-stick crumbs, not black, increase the speed
*Suitable for acrylic, PVC, wood and other materials
Specifications:
*Material: Metal
*Color: Sliver(As pictures show)
*Cutter Dimension: 22*3.175mm(1/8")(Approx.)
*Overall Length: 38mm/1.5inch(Approx.)
Package Contents:
1*Milling Cutter
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

6mm 2 Flute Straight Shank Aluminium End Mill Cutter CNC Drill Spiral Bit Tools
Details:
*100% Brand new and high quality
*Flutes: Two Flutes
*High-density polished, superhard, wear-resistant, high temperature
*Mainly used in cutting and hook slots
*Color: As Pictures Show
*Material:HSS steel Aluminium
*Dimension: (Approx.)
Mill diameter: 6mm
Shank diameter: 6mm
Flute length: 24mm
Total length: 68mm
Package Content:
1*End Mill Cutter CNC Bit Extended
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

CNC End Mill Kit Ball Nose Bits Shank 3 Flute Metal Supplies 22*3.175mm
Features:
*1/8" Helical Milling Cutting Cutter 3 Flute Router Bit For Acrylic Wood Plastic
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Using precise machine tool grinding out the unique spiral blade angle, improve sharpness
*Design of oversized spiral and discharge chips, to prevent sticking blade, raising production efficiency
*High concentricity, non-stick crumbs, not black, increase the speed
*Suitable for acrylic, PVC, wood and other materials
Specifications:
*Material: Metal
*Color: Sliver(As pictures show)
*Cutter Dimension: 22*3.175mm(1/8")(Approx.)
*Overall Length: 38mm/1.5inch(Approx.)
Package Contents:
1*Milling Cutter
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

2.5x4mm Single Flute Spiral Router Bit For Aluminum 1/8 Shank CNC End Mill Tool
Features:
*2.5*4mm Single Flute Spiral Router Bit For Aluminum 1/8 Shank CNC End Mill Tools
*100% brand new and high quality
*Excellent combination of upper and lower cutting edge, sharp cutting edge
*High precision grinded and polished, high abrasion resistance and temperature resistance, good rigidity, not easy to break
*No burrs for up and down spiral machining
*High performance, improve the work efficiency, reduce cost
*Suitable for CNC Router Machining Center, Woodworking Machine, Advertising CNC Router, etc
Specifications:
*Material:High-quality Micro Grain Tungsten Steel Solid Carbide
*Type:Single Flute Spiral Solid Carbide End mills
*Cutting Diameter:2.5mm(Approx)
*Flute Length:4mm(Approx)
*Shank Diameter:1/8"(3.175mm)(Approx)
*Overal Length:38.1mm(Approx)
*Best Suitable Materials: Aluminum
*Also for below materials:
MDF, particle board, board with lagging, log, affixed to the skin panels
Acrylic, PVC, resin, plastic, chipboard, composite board, melamine board
Solid wood, native wood, plywood, lotus plate
Package Contents:
1*Milling Cutter Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

1/8 Inch Shank Carbide CNC 4 Flutes Spiral Bit End Mill Cutter Lathe CEL Tools
Item Details:
*100% brand new and high quality
*Suitable for Acrylic, PVC and hard wood
*Shank diameter: 3.175 mm/0.125 inch(Approx)
*Material: Tungsten steel
*Cutting Edge Length: 17 mm/0.67 inch(Approx)
*Cutting Edge Diameter: 3.175 mm/0.125 inch(Approx)
Package Contents:
1*End Mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Metalworking Milling Cutter Steel 1pcs Shank Milling Cutter High Quality
Features:
Use of new ultra-fine fine tungsten steel bar grinding, high rigidity and toughness.
Use of excellent new blade shape, the surface is smooth, not easy to collapse, to enhance the rigidity of the tool, taking into account the rigidity of the tool and chip removal performance, making the end mill and chip more stable.
Tough and wear-resistant.
Round handle, chamfering, easy to use, increase the stability of the performance.
High strength and hardness.
Durable in use.
Specification:
Material: Tungsten Steel
Color: As Picture Show
Blade Diameter: 4mm
Whether it is coated: Yes
Applicable Machine Tools: Milling Machine
Package Contents:
1 * Milling Cutter
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Carbon steel End Mill 45 degree Replacement Accessories Tungsten Steel
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Sharp and without burrs.
* Bilateral center design, 45 degree bevel.
* The surface is smooth and not easy to fold, which improves the rigidity of the tool and makes the cutter and chip more stable.
* Reduce the number of tool changes and improve the machine drive motion cycle.
* With high wear resistance.
* High strength and high hardness.
* Easy to use and durable.
* Applicable to modular steel, wrought iron, carbon steel, alloy steel, chisel steel, ordinary iron and so on.
Specifications:
* Material: Carbide
* Flute: 4 flutes
* Optional Milling Type: 1mm / 2mm / 3mm / 4mm / 6mm / 8mm / 10mm / 12mm
* Tool size:
1mm: 1 * 50 * 4T
2mm: 2 * 50 * 4T S4
3mm: 3 * 50 * 4T S4
4mm: 4 * 50 * 4T
6mm: 6 * 50 * 4T
8mm: 8 * 60 * 4T
10mm: 10 * 75 * 4T
12mm: 12 * 75 * 4T
Package Contents:
1*End Mill
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Carbon steel End Mill 45 degree Replacement Accessories Tungsten Steel
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Sharp and without burrs.
* Bilateral center design, 45 degree bevel.
* The surface is smooth and not easy to fold, which improves the rigidity of the tool and makes the cutter and chip more stable.
* Reduce the number of tool changes and improve the machine drive motion cycle.
* With high wear resistance.
* High strength and high hardness.
* Easy to use and durable.
* Applicable to modular steel, wrought iron, carbon steel, alloy steel, chisel steel, ordinary iron and so on.
Specifications:
* Material: Carbide
* Flute: 4 flutes
* Optional Milling Type: 1mm / 2mm / 3mm / 4mm / 6mm / 8mm / 10mm / 12mm
* Tool size:
1mm: 1 * 50 * 4T
2mm: 2 * 50 * 4T S4
3mm: 3 * 50 * 4T S4
4mm: 4 * 50 * 4T
6mm: 6 * 50 * 4T
8mm: 8 * 60 * 4T
10mm: 10 * 75 * 4T
12mm: 12 * 75 * 4T
Package Contents:
1*End Mill
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Carbon steel End Mill 45 degree Replacement Accessories Tungsten Steel
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Sharp and without burrs.
* Bilateral center design, 45 degree bevel.
* The surface is smooth and not easy to fold, which improves the rigidity of the tool and makes the cutter and chip more stable.
* Reduce the number of tool changes and improve the machine drive motion cycle.
* With high wear resistance.
* High strength and high hardness.
* Easy to use and durable.
* Applicable to modular steel, wrought iron, carbon steel, alloy steel, chisel steel, ordinary iron and so on.
Specifications:
* Material: Carbide
* Flute: 4 flutes
* Optional Milling Type: 1mm / 2mm / 3mm / 4mm / 6mm / 8mm / 10mm / 12mm
* Tool size:
1mm: 1 * 50 * 4T
2mm: 2 * 50 * 4T S4
3mm: 3 * 50 * 4T S4
4mm: 4 * 50 * 4T
6mm: 6 * 50 * 4T
8mm: 8 * 60 * 4T
10mm: 10 * 75 * 4T
12mm: 12 * 75 * 4T
Package Contents:
1*End Mill
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Carbon steel End Mill 45 degree Replacement Accessories Tungsten Steel
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Sharp and without burrs.
* Bilateral center design, 45 degree bevel.
* The surface is smooth and not easy to fold, which improves the rigidity of the tool and makes the cutter and chip more stable.
* Reduce the number of tool changes and improve the machine drive motion cycle.
* With high wear resistance.
* High strength and high hardness.
* Easy to use and durable.
* Applicable to modular steel, wrought iron, carbon steel, alloy steel, chisel steel, ordinary iron and so on.
Specifications:
* Material: Carbide
* Flute: 4 flutes
* Optional Milling Type: 1mm / 2mm / 3mm / 4mm / 6mm / 8mm / 10mm / 12mm
* Tool size:
1mm: 1 * 50 * 4T
2mm: 2 * 50 * 4T S4
3mm: 3 * 50 * 4T S4
4mm: 4 * 50 * 4T
6mm: 6 * 50 * 4T
8mm: 8 * 60 * 4T
10mm: 10 * 75 * 4T
12mm: 12 * 75 * 4T
Package Contents:
1*End Mill
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Carbon steel End Mill 45 degree Replacement Accessories Tungsten Steel
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Sharp and without burrs.
* Bilateral center design, 45 degree bevel.
* The surface is smooth and not easy to fold, which improves the rigidity of the tool and makes the cutter and chip more stable.
* Reduce the number of tool changes and improve the machine drive motion cycle.
* With high wear resistance.
* High strength and high hardness.
* Easy to use and durable.
* Applicable to modular steel, wrought iron, carbon steel, alloy steel, chisel steel, ordinary iron and so on.
Specifications:
* Material: Carbide
* Flute: 4 flutes
* Optional Milling Type: 1mm / 2mm / 3mm / 4mm / 6mm / 8mm / 10mm / 12mm
* Tool size:
1mm: 1 * 50 * 4T
2mm: 2 * 50 * 4T S4
3mm: 3 * 50 * 4T S4
4mm: 4 * 50 * 4T
6mm: 6 * 50 * 4T
8mm: 8 * 60 * 4T
10mm: 10 * 75 * 4T
12mm: 12 * 75 * 4T
Package Contents:
1*End Mill
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Carbon steel End Mill 45 degree Replacement Accessories Tungsten Steel
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Sharp and without burrs.
* Bilateral center design, 45 degree bevel.
* The surface is smooth and not easy to fold, which improves the rigidity of the tool and makes the cutter and chip more stable.
* Reduce the number of tool changes and improve the machine drive motion cycle.
* With high wear resistance.
* High strength and high hardness.
* Easy to use and durable.
* Applicable to modular steel, wrought iron, carbon steel, alloy steel, chisel steel, ordinary iron and so on.
Specifications:
* Material: Carbide
* Flute: 4 flutes
* Optional Milling Type: 1mm / 2mm / 3mm / 4mm / 6mm / 8mm / 10mm / 12mm
* Tool size:
1mm: 1 * 50 * 4T
2mm: 2 * 50 * 4T S4
3mm: 3 * 50 * 4T S4
4mm: 4 * 50 * 4T
6mm: 6 * 50 * 4T
8mm: 8 * 60 * 4T
10mm: 10 * 75 * 4T
12mm: 12 * 75 * 4T
Package Contents:
1*End Mill
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Carbon steel End Mill 45 degree Replacement Accessories Tungsten Steel
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Sharp and without burrs.
* Bilateral center design, 45 degree bevel.
* The surface is smooth and not easy to fold, which improves the rigidity of the tool and makes the cutter and chip more stable.
* Reduce the number of tool changes and improve the machine drive motion cycle.
* With high wear resistance.
* High strength and high hardness.
* Easy to use and durable.
* Applicable to modular steel, wrought iron, carbon steel, alloy steel, chisel steel, ordinary iron and so on.
Specifications:
* Material: Carbide
* Flute: 4 flutes
* Optional Milling Type: 1mm / 2mm / 3mm / 4mm / 6mm / 8mm / 10mm / 12mm
* Tool size:
1mm: 1 * 50 * 4T
2mm: 2 * 50 * 4T S4
3mm: 3 * 50 * 4T S4
4mm: 4 * 50 * 4T
6mm: 6 * 50 * 4T
8mm: 8 * 60 * 4T
10mm: 10 * 75 * 4T
12mm: 12 * 75 * 4T
Package Contents:
1*End Mill
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Carbon steel End Mill 45 degree Replacement Accessories Tungsten Steel
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Sharp and without burrs.
* Bilateral center design, 45 degree bevel.
* The surface is smooth and not easy to fold, which improves the rigidity of the tool and makes the cutter and chip more stable.
* Reduce the number of tool changes and improve the machine drive motion cycle.
* With high wear resistance.
* High strength and high hardness.
* Easy to use and durable.
* Applicable to modular steel, wrought iron, carbon steel, alloy steel, chisel steel, ordinary iron and so on.
Specifications:
* Material: Carbide
* Flute: 4 flutes
* Optional Milling Type: 1mm / 2mm / 3mm / 4mm / 6mm / 8mm / 10mm / 12mm
* Tool size:
1mm: 1 * 50 * 4T
2mm: 2 * 50 * 4T S4
3mm: 3 * 50 * 4T S4
4mm: 4 * 50 * 4T
6mm: 6 * 50 * 4T
8mm: 8 * 60 * 4T
10mm: 10 * 75 * 4T
12mm: 12 * 75 * 4T
Package Contents:
1*End Mill
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

2.5*4mm Single Flute Spiral Router Bits Aluminum 1/8 Shank CNC End Milling Tools
Features:
*2.5*4mm Single Flute Spiral Router Bit For Aluminum 1/8 Shank CNC End Mill Tools
*100% brand new and high quality
*Excellent combination of upper and lower cutting edge, sharp cutting edge
*High precision grinded and polished, high abrasion resistance and temperature resistance, good rigidity, not easy to break
*No burrs for up and down spiral machining
*High performance, improve the work efficiency, reduce cost
*Suitable for CNC Router Machining Center, Woodworking Machine, Advertising CNC Router, etc
Specifications:
*Material:High-quality Micro Grain Tungsten Steel Solid Carbide
*Type:Single Flute Spiral Solid Carbide End mills
*Cutting Diameter:2.5mm(Approx)
*Flute Length:4mm(Approx)
*Shank Diameter:1/8"(3.175mm)(Approx)
*Overal Length:38.1mm(Approx)
*Best Suitable Materials: Aluminum
*Also for below materials:
MDF, particle board, board with lagging, log, affixed to the skin panels
Acrylic, PVC, resin, plastic, chipboard, composite board, melamine board
Solid wood, native wood, plywood, lotus plate
Package Contents:
1*Milling Cutter Bit
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.