- -30%
Equipo MT2 Live Center 50 HRC Accesorio 1pc Fresado rotativo Metalurgia
Equipo MT2 Live Center 50 HRC Accesorio 1pc Fresado rotativo Metalurgia
$ 23,53
30% de descuento
$ 33,61
Sin impuestos
Equipment MT2 Live Center 50 HRC Accessory 1pc Rotary Milling Metalworking
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*MT2 Precision Rotary EDM Milling Center Taper Metalworking Lathe Tool
*The center of the lathe is a tool that has been ground to a certain extent to accurately position the workpiece on the shaft.
*It has an angle of 60°. The main purpose of the center is to ensure that concentric work is produced. This allows the workpiece to be transferred between machining operations without any loss of precision.
*Parts can be turned on a lathe, sent for quenching and tempering, and then ground between the centers of the cylindrical grinder. The center is also used to support longer workpieces where cutting forces can over deflect the workpiece , thereby reducing the finish and precision of the workpiece.
*The conical part is made of T10 steel with a quenching hardness of 55 to 60 HRC and the main part is made of 40Cr steel with a quenching hardness of 45 to 50 HRC.
*High quality bearing design, using high speed bearings to achieve high precision.
*Dust seals prevent chips from entering the bearings, thus extending service life.
*Designed for lathes in medium and medium load environments.
*Good balance and smoothness for effective steering. Ideal for supporting your work on the tailstock end of the lathe.
Specification:
*Type: MT2
*Material: Tool Steel (T10, 40Cr)
*Accuracy: 0.01
*Angle: 60°
Package Contents:
1 * MT2 Live Center
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*MT2 Precision Rotary EDM Milling Center Taper Metalworking Lathe Tool
*The center of the lathe is a tool that has been ground to a certain extent to accurately position the workpiece on the shaft.
*It has an angle of 60°. The main purpose of the center is to ensure that concentric work is produced. This allows the workpiece to be transferred between machining operations without any loss of precision.
*Parts can be turned on a lathe, sent for quenching and tempering, and then ground between the centers of the cylindrical grinder. The center is also used to support longer workpieces where cutting forces can over deflect the workpiece , thereby reducing the finish and precision of the workpiece.
*The conical part is made of T10 steel with a quenching hardness of 55 to 60 HRC and the main part is made of 40Cr steel with a quenching hardness of 45 to 50 HRC.
*High quality bearing design, using high speed bearings to achieve high precision.
*Dust seals prevent chips from entering the bearings, thus extending service life.
*Designed for lathes in medium and medium load environments.
*Good balance and smoothness for effective steering. Ideal for supporting your work on the tailstock end of the lathe.
Specification:
*Type: MT2
*Material: Tool Steel (T10, 40Cr)
*Accuracy: 0.01
*Angle: 60°
Package Contents:
1 * MT2 Live Center
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
Política de seguridad
Política de entrega
Política de devolución
