- -30%
Varillas de soldadura de reparación de soldadura fuerte de alambre de soldadura de aluminio de baja temperatura de 20x500mm
Varillas de soldadura de reparación de soldadura fuerte de alambre de soldadura de aluminio de baja temperatura de 20x500mm
$ 8,03
30% de descuento
$ 11,47
Sin impuestos
20x 500mm Low Temperature Aluminum Welding Wire Solder Brazing Repair Weld Rods
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Wide range of applications - suitable for welding or hardening of high strength, ductile and corrosion resistant alloys.
*High-quality materials - made of aluminum material, non-toxic, tasteless, durable.
*No solder powder required - no other solder powder with aluminum alloy as flux and coating as base.
*Applications - including welded filler wire and spray and flame metallized wire. It can also be used for argon arc welding and pure aluminum filling materials, connection with aluminum bushings and guide rods of electrolytic aluminum plants, and electricity, chemicals, food, etc.
*Perfect welding effect - Due to the internal powder, excellent weldability and corrosion resistance, high thermal conductivity, high electrical conductivity and excellent processing properties, the design has a sufficient and smooth welding effect.
Specifications:
*Material: Aluminum
*Color: Silver(As pictures show)
*Size: 50cm * 2mm(Approx.)
*Working Temperature: 380°-400°
How-to-use:
* Clean and polish the physical surface.
* Heat the surface of the metal material to the wire temperature to make it work from 380° to 400°.
* When repairing thin aluminum, the aluminum-based metal is heated to the correct working temperature, and then the wire is rubbed and melted to form a weld.
* Weld small objects with propane gas, heat and weld large objects with industrial gas or induction heating, and must be naturally cooled after welding.
Warm Tips:
* The thicker the part is, the more difficult it is to heat up, so it is important to have a reasonable heat source.
* As long as the surface temperature of the base metal reaches the working temperature of the wire, welding can be started.
* When using acetylene welding, neutral flame welding should be used, but do not directly burn the welding wire.
* Applicable heat sources: such as propane, oxyacetylene, etc.
* Storage: Store in a dry and ventilated place.
Package Contents:
20 * Aluminum Welding Wires
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
Features:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Wide range of applications - suitable for welding or hardening of high strength, ductile and corrosion resistant alloys.
*High-quality materials - made of aluminum material, non-toxic, tasteless, durable.
*No solder powder required - no other solder powder with aluminum alloy as flux and coating as base.
*Applications - including welded filler wire and spray and flame metallized wire. It can also be used for argon arc welding and pure aluminum filling materials, connection with aluminum bushings and guide rods of electrolytic aluminum plants, and electricity, chemicals, food, etc.
*Perfect welding effect - Due to the internal powder, excellent weldability and corrosion resistance, high thermal conductivity, high electrical conductivity and excellent processing properties, the design has a sufficient and smooth welding effect.
Specifications:
*Material: Aluminum
*Color: Silver(As pictures show)
*Size: 50cm * 2mm(Approx.)
*Working Temperature: 380°-400°
How-to-use:
* Clean and polish the physical surface.
* Heat the surface of the metal material to the wire temperature to make it work from 380° to 400°.
* When repairing thin aluminum, the aluminum-based metal is heated to the correct working temperature, and then the wire is rubbed and melted to form a weld.
* Weld small objects with propane gas, heat and weld large objects with industrial gas or induction heating, and must be naturally cooled after welding.
Warm Tips:
* The thicker the part is, the more difficult it is to heat up, so it is important to have a reasonable heat source.
* As long as the surface temperature of the base metal reaches the working temperature of the wire, welding can be started.
* When using acetylene welding, neutral flame welding should be used, but do not directly burn the welding wire.
* Applicable heat sources: such as propane, oxyacetylene, etc.
* Storage: Store in a dry and ventilated place.
Package Contents:
20 * Aluminum Welding Wires
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
Política de seguridad
Política de entrega
Política de devolución
