- -30%
Sin color - -50-110 ° C W1209 Termostato digital Control de temperatura NUEVO DC-12V Sensor N4F2
Sin color - -50-110 ° C W1209 Termostato digital Control de temperatura NUEVO DC-12V Sensor N4F2
$ 1,91
30% de descuento
$ 2,73
Sin impuestos
Description:
Product Description
Describtion : Temperature range :-50-110 â„
Dimensions: 48 * 40mm
Temperature control mode: ON / OFF
ResolutionWhen temperature is 0.1â„, the resolution is -9.999.9, other temperature segment is 1â„
Control accuracy: 0.1 â„
Hysteresis accuracy: 0.1â„
Refresh rate: 0.5S
High temperature protection 0-110â„
Supply voltage: DC 12V
Static current: ≤ 35MA, attract current ≤ 65MA
Output voltage: DC 12V
Output power: 20A relay
Measurement input: NTC (10K 0.5% ) Waterproof Sensor
Environmental requirements: -10 60 â„ Humidity 20% -85%
How to use:Connect the power supply and the load, you can supply to the controller,
Is displayed as a measured temperature,
Press the SET button, the display flashes the temperature,
Press - to set the desired temperature,
After setting press SET to confirm return,
The controller automatically performs the relay by setting off!
Lights, LED status descriptions:Indicator: Off The relay is switched off, Always indicate the relay is closed.
LED: Shows LL is the sensor open, showing ?HH is out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection.
Preview:
Product Description
Describtion : Temperature range :-50-110 â„
Dimensions: 48 * 40mm
Temperature control mode: ON / OFF
ResolutionWhen temperature is 0.1â„, the resolution is -9.999.9, other temperature segment is 1â„
Control accuracy: 0.1 â„
Hysteresis accuracy: 0.1â„
Refresh rate: 0.5S
High temperature protection 0-110â„
Supply voltage: DC 12V
Static current: ≤ 35MA, attract current ≤ 65MA
Output voltage: DC 12V
Output power: 20A relay
Measurement input: NTC (10K 0.5% ) Waterproof Sensor
Environmental requirements: -10 60 â„ Humidity 20% -85%
How to use:Connect the power supply and the load, you can supply to the controller,
Is displayed as a measured temperature,
Press the SET button, the display flashes the temperature,
Press - to set the desired temperature,
After setting press SET to confirm return,
The controller automatically performs the relay by setting off!
Lights, LED status descriptions:Indicator: Off The relay is switched off, Always indicate the relay is closed.
LED: Shows LL is the sensor open, showing ?HH is out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection.
Preview:
Política de seguridad
Política de entrega
Política de devolución
