- -30%
Taladro de bisagra Posicionamiento 9/64 &*39 &*39 de abridor de orificios Acero de alta velocidad Alta calidad
Taladro de bisagra Posicionamiento 9/64 &*39 &*39 de abridor de orificios Acero de alta velocidad Alta calidad
$ 8,24
30% de descuento
$ 11,77
Sin impuestos
Hinge drill Positioning 9/64'' Of Hole Opener High speed steel High quality
Features:
*100% brand new and high quality
* Made of high-speed steel, durable
*Automatic positioning center improves positioning accuracy and efficiency
*Precise positioning, no shift
*Double face design-quickly and automatically discharge sawdust from the holes on both sides, and will not block the drill bit
*When opening the hole, please adjust according to the hardness of the wood.If the wood is soft, you can choose the smaller one, if the wood is hard, you can choose the corresponding or larger one
*If the center drill cannot be removed after drilling, use a hex wrench to separate the drill
*The diameter of the center drill shank is 6mm, which is suitable for most general electric drills
* Suitable for hinges, handles, drawer slides, carpentry
Specifications:
*Hole Size:
5/64'': The diameter of the hole is about 2mm, use self-tapping screws around 2.2-2.8mm
7/64'': The diameter of the hole is about 2.8mm, use about 3-3.5mm self-tapping screws
9/64'': The diameter of the opening is about 3.5mm, and use self-tapping screws of about 4-4.5mm
11/64'': The diameter of the hole is about 4.5mm, and the self-tapping screw is about 5-5.5mm
*Material: High speed steel
*Color as shown
Package Contents:
4*Hinge drill
1* Wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Features:
*100% brand new and high quality
* Made of high-speed steel, durable
*Automatic positioning center improves positioning accuracy and efficiency
*Precise positioning, no shift
*Double face design-quickly and automatically discharge sawdust from the holes on both sides, and will not block the drill bit
*When opening the hole, please adjust according to the hardness of the wood.If the wood is soft, you can choose the smaller one, if the wood is hard, you can choose the corresponding or larger one
*If the center drill cannot be removed after drilling, use a hex wrench to separate the drill
*The diameter of the center drill shank is 6mm, which is suitable for most general electric drills
* Suitable for hinges, handles, drawer slides, carpentry
Specifications:
*Hole Size:
5/64'': The diameter of the hole is about 2mm, use self-tapping screws around 2.2-2.8mm
7/64'': The diameter of the hole is about 2.8mm, use about 3-3.5mm self-tapping screws
9/64'': The diameter of the opening is about 3.5mm, and use self-tapping screws of about 4-4.5mm
11/64'': The diameter of the hole is about 4.5mm, and the self-tapping screw is about 5-5.5mm
*Material: High speed steel
*Color as shown
Package Contents:
4*Hinge drill
1* Wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Política de seguridad
Política de entrega
Política de devolución
