- -30%
14 piezas broca autocentrante bisagra herrajes perforadora puerta herramienta hoja oblicua
14 piezas broca autocentrante bisagra herrajes perforadora puerta herramienta hoja oblicua
$ 26,45
30% de descuento
$ 37,78
Sin impuestos
14PC Drill Bit Self Centering Hinge Hardware Punch Door Tool Oblique blade
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*Other features:
Efficient and accurate positioning;
Automatic positioning center can improve accuracy and efficiency. Double face design-quickly and automatically discharge wood chips from both sides of the hole;
The newly upgraded 135° oblique blade drill bit;
135° inclined blade drill bit makes drilling easier and faster;
The diameter of the shank of all center drill bits is 6mm, which is suitable for most general electric drills;
Suitable for hinges, handles, drawer slides, woodworking, etc. Suitable for professionals and DIY;
Use low speed when drilling (usually kept at 2000r/min-3000r/min). Too fast will deviate from the center, break or get stuck
Tips:
*Use low speed when drilling (usually kept at 2000r/min-3000r/min). Too fast will deviate from the center, break or get stuck
*When drilling holes, please adjust according to the hardness of the wood. If the wood is soft, you can choose a smaller center drill bit. If the wood is hard, you can choose the corresponding or larger wood
*If you cannot take out the center drill bit after drilling, use a hexagon wrench to separate the drill bit
Specifications:
*Material: HSS
*Color: Silver (As Pictures Show)
*Size (approximate):
1) 5/64 inches: the hole diameter is about 2 mm, use about 2.2-2.8 mm self-tapping screws
2) 7/64'': The hole diameter is about 2.8 mm, and the tapping screw of about 3-3.5 mm is used
3) 9/64'': The hole diameter is about 3.5mm, using about 4-4.5 mm self-tapping screws
4) 11/64'': The hole diameter is about 4.5mm, using about 5-5.5 mm self-tapping screws
5) 5mm: The hole diameter is about 5 mm, use about 5.5-6 mm self-tapping screws
6) 13/64": The hole diameter is about 5.2mm, using about 6-6.5 mm self-tapping screws
7) 1/4": The diameter of the hole is about 6.5mm, use a tapping screw of about 7-7.5 mm
Package Contents:
14 * Center drill bits (1/4", 5/64', 7/64'', 9/64'', 11/64'', 13/64'', 5mm)
2 * Hexagon wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Features:
*100% brand new and high quality
*Made of high-quality materials, durable
*Other features:
Efficient and accurate positioning;
Automatic positioning center can improve accuracy and efficiency. Double face design-quickly and automatically discharge wood chips from both sides of the hole;
The newly upgraded 135° oblique blade drill bit;
135° inclined blade drill bit makes drilling easier and faster;
The diameter of the shank of all center drill bits is 6mm, which is suitable for most general electric drills;
Suitable for hinges, handles, drawer slides, woodworking, etc. Suitable for professionals and DIY;
Use low speed when drilling (usually kept at 2000r/min-3000r/min). Too fast will deviate from the center, break or get stuck
Tips:
*Use low speed when drilling (usually kept at 2000r/min-3000r/min). Too fast will deviate from the center, break or get stuck
*When drilling holes, please adjust according to the hardness of the wood. If the wood is soft, you can choose a smaller center drill bit. If the wood is hard, you can choose the corresponding or larger wood
*If you cannot take out the center drill bit after drilling, use a hexagon wrench to separate the drill bit
Specifications:
*Material: HSS
*Color: Silver (As Pictures Show)
*Size (approximate):
1) 5/64 inches: the hole diameter is about 2 mm, use about 2.2-2.8 mm self-tapping screws
2) 7/64'': The hole diameter is about 2.8 mm, and the tapping screw of about 3-3.5 mm is used
3) 9/64'': The hole diameter is about 3.5mm, using about 4-4.5 mm self-tapping screws
4) 11/64'': The hole diameter is about 4.5mm, using about 5-5.5 mm self-tapping screws
5) 5mm: The hole diameter is about 5 mm, use about 5.5-6 mm self-tapping screws
6) 13/64": The hole diameter is about 5.2mm, using about 6-6.5 mm self-tapping screws
7) 1/4": The diameter of the hole is about 6.5mm, use a tapping screw of about 7-7.5 mm
Package Contents:
14 * Center drill bits (1/4", 5/64', 7/64'', 9/64'', 11/64'', 13/64'', 5mm)
2 * Hexagon wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Política de seguridad
Política de entrega
Política de devolución
