- -30%
Broca para abridor de vidrio Broca para herramienta de diamante Broca de 2 pulgadas Nueva práctica
Broca para abridor de vidrio Broca para herramienta de diamante Broca de 2 pulgadas Nueva práctica
$ 5,02
30% de descuento
$ 7,17
Sin impuestos
Opener Glass Drill Bit Diamond tool bit 2 Inch Drill Bit New Practical
Features:
*100% brand new and high quality.
* Rugged and easy to use, your good assistant for work and life.
*Diamond coated hole saw is suitable for drilling holes in glass, marble, ceramic tile or granite
*Use with water as lubricant
Quick tips:1. Please add water as coolant and drill slowly
2. Start drilling to the surface at an angle of 45 degrees, and align the hole form at an angle of 90 degrees
3.Do not use the electric drill when the machine is hammering.
4. The hole is clean without further processing
How to use a hand drill to drill holes in tiles?
1. Place the drill bit on the tile at a 45 degree angle and make a half-moon-shaped notch on it
2. Slowly raise the drill bit to 60 degrees, and then lightly drill
3. Reach 90 degrees and continue drilling
4. Finally drill out the tiles
Need to "swing" the drill bit instead of continuously applying steady pressure.
Specifications:
*Hole diameter/outer diameter: 50mm (close to 2inch)
*Inner diameter: 47.5mm
*Tool handle diameter: 10mm (3/8inch)
*Total length: 55mm (2-3/16inch)
*Drilling depth: 25mm depth
*Quantity: 1 piece
*Material: diamond, metal
*Drilling speed: drilling speed once per second
Package Contents:
1*drill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Features:
*100% brand new and high quality.
* Rugged and easy to use, your good assistant for work and life.
*Diamond coated hole saw is suitable for drilling holes in glass, marble, ceramic tile or granite
*Use with water as lubricant
Quick tips:1. Please add water as coolant and drill slowly
2. Start drilling to the surface at an angle of 45 degrees, and align the hole form at an angle of 90 degrees
3.Do not use the electric drill when the machine is hammering.
4. The hole is clean without further processing
How to use a hand drill to drill holes in tiles?
1. Place the drill bit on the tile at a 45 degree angle and make a half-moon-shaped notch on it
2. Slowly raise the drill bit to 60 degrees, and then lightly drill
3. Reach 90 degrees and continue drilling
4. Finally drill out the tiles
Need to "swing" the drill bit instead of continuously applying steady pressure.
Specifications:
*Hole diameter/outer diameter: 50mm (close to 2inch)
*Inner diameter: 47.5mm
*Tool handle diameter: 10mm (3/8inch)
*Total length: 55mm (2-3/16inch)
*Drilling depth: 25mm depth
*Quantity: 1 piece
*Material: diamond, metal
*Drilling speed: drilling speed once per second
Package Contents:
1*drill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Política de seguridad
Política de entrega
Política de devolución
