- -30%
Juego de pinzas de resorte Herramienta de mandril CNC Taladrado Roscado Grabado Fresado de 18 mm
Juego de pinzas de resorte Herramienta de mandril CNC Taladrado Roscado Grabado Fresado de 18 mm
$ 8,59
30% de descuento
$ 12,27
Sin impuestos
Spring collet set CNC Chuck Tool Boring Tapping Engraving 18mm Milling
Features:
*7Pcs ER11 Spring Collet Set CNC Milling Lathe Chuck Tool Holder 1/16" 1/4" 1/8"
*100% brand new and high quality
*Selection of materials, high-quality spring steel, long lasting
*Clamping force, wide clamping range, high accuracy
*Widely used in boring, milling, drilling, tapping, engraving, CNC, and other processing
Specifications:
*Name:7pcs ER11 Spring Collet
*Model:438484
*Material: Spring steel
*Size:1/8",1/16",1/4",3/16",5/32",3/32",7/32"(Approx)
*Overall Length:18mm(Approx)
*Suitable For: Boring, milling, drilling, tapping, engraving, CNC, spindle machines, and other processing
How to use:
1. Insert the tip into the pressure cap, gently turn the retainer until the pressure cap eccentric retainer portion
recessed groove along the direction of the arrow evenly push hard retainer, you can mount the internal pressure cap.
2. The pressure cap with retainer mounted together on a spindle or chuck body, the cylindrical tool shank after
wiping loaded clamping hole, use a wrench to tighten the pressure cap even force until the date before the tool folder in prison use.
(Note: not in the tool and avoid tightening pressure cap installed to avoid damage to the retainer)
3. ATC with a wrench loosen pressure cap out of the chuck and the tool, remove the tool, retainer direction of the arrow
push hard to quit, and then need to put on retainer to the other aperture.
Package Contents:
7pcs ER11 Spring Collets
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Features:
*7Pcs ER11 Spring Collet Set CNC Milling Lathe Chuck Tool Holder 1/16" 1/4" 1/8"
*100% brand new and high quality
*Selection of materials, high-quality spring steel, long lasting
*Clamping force, wide clamping range, high accuracy
*Widely used in boring, milling, drilling, tapping, engraving, CNC, and other processing
Specifications:
*Name:7pcs ER11 Spring Collet
*Model:438484
*Material: Spring steel
*Size:1/8",1/16",1/4",3/16",5/32",3/32",7/32"(Approx)
*Overall Length:18mm(Approx)
*Suitable For: Boring, milling, drilling, tapping, engraving, CNC, spindle machines, and other processing
How to use:
1. Insert the tip into the pressure cap, gently turn the retainer until the pressure cap eccentric retainer portion
recessed groove along the direction of the arrow evenly push hard retainer, you can mount the internal pressure cap.
2. The pressure cap with retainer mounted together on a spindle or chuck body, the cylindrical tool shank after
wiping loaded clamping hole, use a wrench to tighten the pressure cap even force until the date before the tool folder in prison use.
(Note: not in the tool and avoid tightening pressure cap installed to avoid damage to the retainer)
3. ATC with a wrench loosen pressure cap out of the chuck and the tool, remove the tool, retainer direction of the arrow
push hard to quit, and then need to put on retainer to the other aperture.
Package Contents:
7pcs ER11 Spring Collets
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Política de seguridad
Política de entrega
Política de devolución
