- -30%
10pcs ER16 1mm-10mm Juego de portabrocas de resorte CNC Herramienta de grabado de torno de fresado
10pcs ER16 1mm-10mm Juego de portabrocas de resorte CNC Herramienta de grabado de torno de fresado
$ 16,09
30% de descuento
$ 22,98
Sin impuestos
10pcs ER16 1mm-10mm Spring Collet Chuck Set CNC Milling-Lathe Engraving Tool
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Selected high quality carbon steel. Hardened and precision ground.
* Large clamping force and large clamping range, widely used in machining centers, ordinary milling machines, CNC milling machines, engraving machines, high-speed machines, etc. (Used with ER16 nuts.)
* 10Pcs ER16 1mm-10mm Collet Set CNC Milling Engraving Tool
Specification:
* Name: Collet Chuck
* Model: 120259
* Type: Machine Tool Accessories
* Applicable Machine: CNC Machine
* Precision: 0.008mm
* Model: ER16 (10pcs, 1mm-10mm)
(1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm)
The Correct Way To Install The Collet Nut:
1.Put the chuck into the pressure cap, and gently turn the clamping spring. When the pressure is eccentric, the groove on the cover is a clamping spring groove. Push the clamp spring in the direction of the arrow and use equal force to install the pressure cover.
2.Install the clamping spring and cover on the chuck body or spindle together. After inserting and clamping after wiping the cylindrical handle, use a wrench to tighten the pressure cap until the tool is firmly clamped before use.
(Caution: Avoid tightening the pressure cap of the unmounted tool to avoid damaging the clamping spring)
3.Use a wrench to loosen the pressure cover, remove the chuck or tool, and remove the tool. Push out the clamping spring in the direction of the direction arrow. Then replace other clamping springs as needed.
Package Contents:
10 * ER16 Collets
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Selected high quality carbon steel. Hardened and precision ground.
* Large clamping force and large clamping range, widely used in machining centers, ordinary milling machines, CNC milling machines, engraving machines, high-speed machines, etc. (Used with ER16 nuts.)
* 10Pcs ER16 1mm-10mm Collet Set CNC Milling Engraving Tool
Specification:
* Name: Collet Chuck
* Model: 120259
* Type: Machine Tool Accessories
* Applicable Machine: CNC Machine
* Precision: 0.008mm
* Model: ER16 (10pcs, 1mm-10mm)
(1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm)
The Correct Way To Install The Collet Nut:
1.Put the chuck into the pressure cap, and gently turn the clamping spring. When the pressure is eccentric, the groove on the cover is a clamping spring groove. Push the clamp spring in the direction of the arrow and use equal force to install the pressure cover.
2.Install the clamping spring and cover on the chuck body or spindle together. After inserting and clamping after wiping the cylindrical handle, use a wrench to tighten the pressure cap until the tool is firmly clamped before use.
(Caution: Avoid tightening the pressure cap of the unmounted tool to avoid damaging the clamping spring)
3.Use a wrench to loosen the pressure cover, remove the chuck or tool, and remove the tool. Push out the clamping spring in the direction of the direction arrow. Then replace other clamping springs as needed.
Package Contents:
10 * ER16 Collets
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
Política de seguridad
Política de entrega
Política de devolución
