Equipo para trabajar metales

Turning tool Blade CCMT060204 S06K-SCLCR06 Set Cutter Thread Practical
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Good accessory steel and long life, reducing the user cost of the tool
* High grip, impact resistance and strong, clear speed advantage, can cut large edges and process
* User clamping and convenient replacement, the insert and pad can be replaced only with a wrench
* Practical processing environment, even in very dirty environments (such as cast iron)
* Applicable to: semi-finishing, finishing
Specification:
* Tool Holder Model: S06K-SCLCR06
* Material: Steel
* Tool Holder Diameter: 6 mm(Approx.)
* Tool Holder Length: 125 mm(Approx.)
* Wrench: T8
* Insert: 10pcs CCMT060204
Warm Tips:
The wrench color will be sent at random, thank you for your understanding.
Package Contents:
1*S06K-SCLCR06 Tool Holder
1*T8 Wrench
10*CCMT060204 Insert
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

R8 Collet HRC 55 Metric Mill Chuck Holder 65Mn Spring Steel 7/16-20UNF Thread
Features:
100% brand new and high quality
Made of high-quality materials, durable
Precision grinding to achieve close tolerances
Rectified and grated
Suitable for various milling machine spindle taper holes of R8
Used for clamping tools, replacing the spindle taper hole, easy to use, expanding the scope of use of the machine tool
Product parameters:
Clamping diameter: 5/16 inch
Pull line: 7/16-20UNF
Material: 65Mn spring steel
Hardness: HRC 55
Accuracy: 0.0005 inch (0.013 mm)
Overall length: 103 mm / 4.06 inches
Top diameter: 32 mm/1.26 inch
Bottom diameter: 24 mm/0.94 inch
Package list:
1 *Milling tool chuck holder
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Details:
*100% Brand new and high quality
*Made of high quality tungsten carbide
*Fit for cutting soft materials, cast iron, cast steel, alloy steel(below HRC55), General speed or high speed milling
*Model: R1.0*20*50-D6 5.7°
*Flutes: 2 Flutes
*Worked Material HRC: 0~55
*Radius: 1.0mm (Approx.)
*Coating: TiAIN
*Shank Diameter: 6mm (Approx.)
*Cutting Length: 20mm (Approx.)
*Overall Length: 50mm (Approx.)
*Single Side Angle: 5.7°
Package Contents:
1*End Mill
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

3MM End Mill Solid Carbide 4 Flute Shank Woodworking Tools CNC Reliable
Features:
5PCS Solid Carbide 4 Flute End Mill Shank Tungsten Coated Woodworking Tools 3MM
High quality material, high strength, sturdy and durable
Can be used with module steel, wrought iron, carbon steel, alloy steel, etc
Suitable for DIY home and general construction and engineering
Specifications:
Flute: 4 flutes
Material: tungsten steel
Total length: approx. 50mm
Cutting diameter: approx. 3mm
Shank diameter: approx. 3mm
Package Contents:
5PCS Set End Mill
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

3MM End Mill 4 Flute Shank Tungsten Coated Woodworking Tools CNC Latest
Features:
5PCS Solid Carbide 4 Flute End Mill Shank Tungsten Coated Woodworking Tools 3MM
High quality material, high strength, sturdy and durable
Can be used with module steel, wrought iron, carbon steel, alloy steel, etc
Suitable for DIY home and general construction and engineering
Specifications:
Flute: 4 flutes
Material: tungsten steel
Total length: approx. 50mm
Cutting diameter: approx. 3mm
Shank diameter: approx. 3mm
Package Contents:
5PCS Set End Mill
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1/8" End Mill Cutter Shank Blade For Acrylic PVC and hard wood Hot Sale
Details:
Made from high quality carbide for a precise, easy cutting experience.
Suitable for Acrylic, PVC and hard wood.
Material:Carbide
Color:Silver (As Picture Show)
Shank Diameter: 3.175mm
Blade Diameter: 3.175mm
Blade Length: 15mm
Overall Length: 39mm (Approx)
Application: Acrylic, PVC, hard wood
Quantity: 10pcs/kit
Dimension:3.2 * 39mm/0.13 * 1.54 inch(Dia x L)
Package Contents:
10 * Carbide CNC Four 4 Flute Spiral Bit End Mill Cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

4 Flute End Mill Cutter Spiral For Acrylic PVC and hard wood CNC Newest
Details:
Made from high quality carbide for a precise, easy cutting experience.
Suitable for Acrylic, PVC and hard wood.
Material:Carbide
Color:Silver (As Picture Show)
Shank Diameter: 3.175mm
Blade Diameter: 3.175mm
Blade Length: 15mm
Overall Length: 39mm (Approx)
Application: Acrylic, PVC, hard wood
Quantity: 10pcs/kit
Dimension:3.2 * 39mm/0.13 * 1.54 inch(Dia x L)
Package Contents:
10 * Carbide CNC Four 4 Flute Spiral Bit End Mill Cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Aluminum Carbide Inserts Blade Turning TCGT110204-AK H01 TCGT21.51 Practical
Details:
* 10Pcs carbide inserts for the processing of nonferrous metals, such as aluminum, copper, etc.
* Full fine grinding of the surface of the surrounding surface
* With a sharp edge
* High strength, high toughness, stable and durable.
* Models: TCGT110204-AK H01
* Quantity: 10Pcs
Package contents:
10* Carbide Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

1PC Shank Collet Chuck Holder CNC Milling Extension Rod Top C3/4-ER20A-50L NEW
Item Details:
*Straight Shank Collet Chuck Holder CNC Milling Extension Rod Top C3/4-ER20A-50L
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Accessories: Suitable for all kinds of drilling and milling machines, spindle Morse taper
*Material: Carbon Steel
*Model: C3 / 4-ER20A-50L
*Shank diameter: 3/4
*C3 / 4 handles hold all ER20 chucks
*Mainly used in all kinds of drilling and milling machines, spindle Morse taper
Package Contents:
1*Straight Chuck Holder
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

For DCMT11T304 Turning Tool Insert 2pcs SDJCR1616H11 16*100mm Replaces
Details:
Profiling bar for semi-finishing and finishing operations
Bar hardness approximately 45HRC
High quality and brand new
Material: Steel
Shank D: 16mm/0.62 inch
Overall L:100mm/3.93 inch
Direction: Right Hand
Lead Cutting Angle: 93 Degree
Accept Insert: DCMT11T304
Package Contents:
1 * SDJCR1616H11 Boring Bar
1 * Wrench
(Inserts are not included)
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Holder Lathe Turning Tool Grooving Cut off Insert MGEHR1010-2 Replacement Kit
Details:
High quality and brand new
Model: MGEHR1010-2
Shank Diameter: 10mm
Overall Length: 100mm
Insert: MGMN200
Package Contents:
1 * Holder
1 * Wrench
4 * Insert
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

3pcs S08K-SCLCR06 Holder CCMT060204 Inserts Steel For Semi-Finishing Equipment
Features:
To maintain tight tolerances unmatched performance.
Accessories steel is good, long life, reducing the user cost of the tool.
High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing.
User clamping and convenient way to replace, only a wrench to complete the replacement of the blade and pad.
Practical and a variety of processing environments, even in very dirty environments such as cast iron also has good features.
High quality and brand new.
Specification:
Model: S08K-SCLCR06
Material: Steel
Shank Diameter: 8mm (Approx)
Shank Length: 125mm (Approx)
Wrench: T8
Accept Inserts: CCMT060204(10pcs)
Suitable For: Semi-finishing, finishing
Package Contents:
1 * S08K-SCLCR06 Holder
1 * T8 Wrench
10 * CCMT060204 Inserts
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

5PC Solid Carbide End Mill Shank Tungsten Coated Wood-working Tools Shank
Features:
5PCS Solid Carbide 4 Flute End Mill Shank Tungsten Coated Woodworking Tools 3MM
High quality material, high strength, sturdy and durable
Can be used with module steel, wrought iron, carbon steel, alloy steel, etc
Suitable for DIY home and general construction and engineering
Specifications:
Flute: 4 flutes
Material: tungsten steel
Total length: approx. 50mm
Cutting diameter: approx. 3mm
Shank diameter: approx. 3mm
Package Contents:
5PCS Set End Mill
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

S06K-SCLCR06 Lathe Boring Bar Turning Holder 10x CCMT060204-HM Carbide Insert
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Good accessory steel and long life, reducing the user cost of the tool
* High grip, impact resistance and strong, clear speed advantage, can cut large edges and process
* User clamping and convenient replacement, the insert and pad can be replaced only with a wrench
* Practical processing environment, even in very dirty environments (such as cast iron)
* Applicable to: semi-finishing, finishing
Specification:
* Tool Holder Model: S06K-SCLCR06
* Material: Steel
* Tool Holder Diameter: 6 mm(Approx.)
* Tool Holder Length: 125 mm(Approx.)
* Wrench: T8
* Insert: 10pcs CCMT060204
Warm Tips:
The wrench color will be sent at random, thank you for your understanding.
Package Contents:
1*S06K-SCLCR06 Tool Holder
1*T8 Wrench
10*CCMT060204 Insert
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Product description:
Brand new high quality Industrial tool.
Square shaped chuck key with long handle.
Solid heavy duty tool.
The anti-skid pattern is designed in the middle of the chuck wrench to prevent the rod from passing
Forcibly knock the anti-slip pattern into the round hole, causing the part of the pole to break
Material: 45# steel
Type: Chuck Wrench
Surface treatment: blackening
Specification: 8 square, 10 square
Size: as shown
Remarks: Suitable for all kinds of chucks with a size of 80-160.
80-100 chuck with 8 square,130-160 chuck with 10 square
Packing list:
1*Chuck wrench
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Aluminum Carbide Inserts TCGT110204-AK H01 TCGT21.51 Blade Turning High quality
Details:
* 10Pcs carbide inserts for the processing of nonferrous metals, such as aluminum, copper, etc.
* Full fine grinding of the surface of the surrounding surface
* With a sharp edge
* High strength, high toughness, stable and durable.
* Models: TCGT110204-AK H01
* Quantity: 10Pcs
Package contents:
10* Carbide Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

R8 Collet Chuck Metric Mill Chuck Holder HRC 65Mn Spring Steel 7/16-20UNF Thread
Features:
100% brand new and high quality
Made of high-quality materials, durable
Precision grinding to achieve close tolerances
Rectified and grated
Suitable for various milling machine spindle taper holes of R8
Used for clamping tools, replacing the spindle taper hole, easy to use, expanding the scope of use of the machine tool
Product parameters:
Clamping diameter: 5/16 inch
Pull line: 7/16-20UNF
Material: 65Mn spring steel
Hardness: HRC 55
Accuracy: 0.0005 inch (0.013 mm)
Overall length: 103 mm / 4.06 inches
Top diameter: 32 mm/1.26 inch
Bottom diameter: 24 mm/0.94 inch
Package list:
1 *Milling tool chuck holder
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Aluminum Carbide Inserts Copper Turning TCGT110204-AK H01 TCGT21.51 Practical
Details:
* 10Pcs carbide inserts for the processing of nonferrous metals, such as aluminum, copper, etc.
* Full fine grinding of the surface of the surrounding surface
* With a sharp edge
* High strength, high toughness, stable and durable.
* Models: TCGT110204-AK H01
* Quantity: 10Pcs
Package contents:
10* Carbide Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Aluminum Carbide Inserts Copper TCGT110204-AK H01 TCGT21.51 Cutter Practical
Details:
* 10Pcs carbide inserts for the processing of nonferrous metals, such as aluminum, copper, etc.
* Full fine grinding of the surface of the surrounding surface
* With a sharp edge
* High strength, high toughness, stable and durable.
* Models: TCGT110204-AK H01
* Quantity: 10Pcs
Package contents:
10* Carbide Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Extension Rod Chuck Holder Drilling Accessory Collet Top C3/4-ER20A-50L
Item Details:
*Straight Shank Collet Chuck Holder CNC Milling Extension Rod Top C3/4-ER20A-50L
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Accessories: Suitable for all kinds of drilling and milling machines, spindle Morse taper
*Material: Carbon Steel
*Model: C3 / 4-ER20A-50L
*Shank diameter: 3/4
*C3 / 4 handles hold all ER20 chucks
*Mainly used in all kinds of drilling and milling machines, spindle Morse taper
Package Contents:
1*Straight Chuck Holder
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Shank End Mill CNC Router Bit 1 1.5 2 2.5 3.175 MM 3.175mm Carbide Extra
Details:
* 10PCS set Carbide Ball Nose End Mill CNC Engraving Cutting, Router bits.
* Chatter resistant design for superior surface finishes and long tool life.
* Sharp cutting reasonable matched with high strength of cutter.
* Arc relief angle makes tool better wear-resistance for wood working
* Suitable for wood, MDF, HDF, solid wood, epoxy board, PVC, plastic
* Flute : 2 Flutes
* Cutting Diameter: d=1 1.5 2 2.5 3.175 MM
* Shank Diameter : D=3.175MM
* Blade length: L1=4 6 8 12 12mm
* Overall length: L=38 MM
* Material : Carbide
* Coating : uncoated
* Quantity: 10Pcs
Package contents:
2Pcs 3.175*1*4*38 Engraving Router bit
2Pcs 3.175*1.5*6*38 Engraving Router bit
2Pcs 3.175*2*8*38 Engraving Router bit
2Pcs 3.175*2.5*12*38 Engraving Router bit
2Pcs 3.175*3.175*12*38 Engraving Router bit
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

8mm S08K-SCLCR06 Turning Tools Lathe Boring Bar W/ 10x CCMT060204-HM Inserts Hot
Features:
To maintain tight tolerances unmatched performance.
Accessories steel is good, long life, reducing the user cost of the tool.
High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing.
User clamping and convenient way to replace, only a wrench to complete the replacement of the blade and pad.
Practical and a variety of processing environments, even in very dirty environments such as cast iron also has good features.
High quality and brand new.
Specification:
Model: S08K-SCLCR06
Material: Steel
Shank Diameter: 8mm (Approx)
Shank Length: 125mm (Approx)
Wrench: T8
Accept Inserts: CCMT060204(10pcs)
Suitable For: Semi-finishing, finishing
Package Contents:
1 * S08K-SCLCR06 Holder
1 * T8 Wrench
10 * CCMT060204 Inserts
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

S08K-SCLCR06 Turning Tools Holder CCMT060204-HM Inserts Wrench Kit Clear Speed
Features:
To maintain tight tolerances unmatched performance.
Accessories steel is good, long life, reducing the user cost of the tool.
High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing.
User clamping and convenient way to replace, only a wrench to complete the replacement of the blade and pad.
Practical and a variety of processing environments, even in very dirty environments such as cast iron also has good features.
High quality and brand new.
Specification:
Model: S08K-SCLCR06
Material: Steel
Shank Diameter: 8mm (Approx)
Shank Length: 125mm (Approx)
Wrench: T8
Accept Inserts: CCMT060204(10pcs)
Suitable For: Semi-finishing, finishing
Package Contents:
1 * S08K-SCLCR06 Holder
1 * T8 Wrench
10 * CCMT060204 Inserts
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Engraving End Mills Slotting Woodworking 10Pcs 3.175*12mm Single Flute
Details:
*100% brand new and high quality
*Suitable Materials: Acrylic, PVC, MDF, high-density board, lotus board,
Solid wood, wood, plastic plate, double color sheet, etc.
*Application: Cutting, engraving, slotting, milling, and so on, such as hollow cut
*High precision grind by imported machine tools
*Unique finish polish, sharp cutting edge
*High durability, not easy to break
*Combine single-edge excellent removing and spiral cutting, can greatly increase cutting speed, while ensuring quality
*Size: 3.175*12mm (Approx.)
Package Contents:
10*End Mills
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Index Boring Bar External Lathe Turning Holder Wrench For CNMG1204 Inserts Set
Details:
Model: MCLNR 1616H12
Material: Carbon Steel
Direction: Right Hand
Tool Cutting Edge Angle: 95°
Square Shank (W*H): 16mm*16mm
Overall Length: 100mm
Package Contents:
1 * External Tool Holder
1 * "L" Type Wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

10pcs 3mm GTN3 CNC Parting Off Tips Inserts NC3030 Carbide Part Off Cutting
Features:
Good precision, high toughness and durability.
High hard, wear-resistant, strong shock resistance, thermal cracking, and resistance to deformation.
High cutting efficiency, long service life.
For steel semi-finishing.
High quality and brand new.
Specification:
Model: ZQMX3N11-1E
Material: YBC251
Color: Gold (As Picture Show)
Width: 3mm
Quantity: 10pcs/box
Package Contents:
10 * Cut-Off Grooving Parting Insert
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Solid Carbide End Mill 4 Flute TiAlN Coated. Micrograin Carbide. Slot Drill.
Features:
* Coating with TIALN Can Cutting Harden materiel, 3 times Durable than Carbide.
* Good milling and cutting performance, ensure the high efficiency of the work.
* Sufficient bending strength and wear resistance, the surface is clean, neat and no glitches.
* High strength, resistance to bending, breakage resistance, long service life.
* Suitable for DIY, Home and General Building / Engineering Using.
Specifications:
* Material: Tungsten Carbide
* Highest cutting hardness: HRC50
* Flute: 4
* Total Length: 75mm / 2.95''
* Blade Length: 25mm / 0.98''
* Diameter of Head: 10mm / 0.39''
Package contents:
1* Straight Shank 4 flutes End Mill
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

For CNMG1204 Turning tool holder Wrench Cutting Boring Lathe Insert Useful
Details:
Model: MCLNR 1616H12
Material: Carbon Steel
Direction: Right Hand
Tool Cutting Edge Angle: 95°
Square Shank (W*H): 16mm*16mm
Overall Length: 100mm
Package Contents:
1 * External Tool Holder
1 * "L" Type Wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Accessories1pc Chuck Holder 3/4" Shank Straight Shank Collet CNC Milling
Item Details:
*Straight Shank Collet Chuck Holder CNC Milling Extension Rod Top C3/4-ER20A-50L
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Accessories: Suitable for all kinds of drilling and milling machines, spindle Morse taper
*Material: Carbon Steel
*Model: C3 / 4-ER20A-50L
*Shank diameter: 3/4
*C3 / 4 handles hold all ER20 chucks
*Mainly used in all kinds of drilling and milling machines, spindle Morse taper
Package Contents:
1*Straight Chuck Holder
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Turning tool holder Cutting Boring CarbonSteel MCLNR 1616H12 Practical
Details:
Model: MCLNR 1616H12
Material: Carbon Steel
Direction: Right Hand
Tool Cutting Edge Angle: 95°
Square Shank (W*H): 16mm*16mm
Overall Length: 100mm
Package Contents:
1 * External Tool Holder
1 * "L" Type Wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Turning tool holder Threading Boring CarbonSteel MCLNR 1616H12 Practical
Details:
Model: MCLNR 1616H12
Material: Carbon Steel
Direction: Right Hand
Tool Cutting Edge Angle: 95°
Square Shank (W*H): 16mm*16mm
Overall Length: 100mm
Package Contents:
1 * External Tool Holder
1 * "L" Type Wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Hard Alloy Cutter For CCGT060204-AK H01 CCGT21.51 CCMT0602 For Aluminum/ Copper
Item Details:
*100% brand new and high quality
*Better smoothness
*Fully fine grinding of the surrounding surface
*Sharp edges for easier cutting
*More durable
*For processing non-ferrous metals such as aluminum, copper, etc
*Model: CCMT CCGT CCGW
Package Contents:
10*Cutters(Box-packed)
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

End Mill Pack 1 1.5 2 2.5 3.175 MM Kit 3.175mm Carbide High Quality Spare
Details:
* 10PCS set Carbide Ball Nose End Mill CNC Engraving Cutting, Router bits.
* Chatter resistant design for superior surface finishes and long tool life.
* Sharp cutting reasonable matched with high strength of cutter.
* Arc relief angle makes tool better wear-resistance for wood working
* Suitable for wood, MDF, HDF, solid wood, epoxy board, PVC, plastic
* Flute : 2 Flutes
* Cutting Diameter: d=1 1.5 2 2.5 3.175 MM
* Shank Diameter : D=3.175MM
* Blade length: L1=4 6 8 12 12mm
* Overall length: L=38 MM
* Material : Carbide
* Coating : uncoated
* Quantity: 10Pcs
Package contents:
2Pcs 3.175*1*4*38 Engraving Router bit
2Pcs 3.175*1.5*6*38 Engraving Router bit
2Pcs 3.175*2*8*38 Engraving Router bit
2Pcs 3.175*2.5*12*38 Engraving Router bit
2Pcs 3.175*3.175*12*38 Engraving Router bit
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

H01 RCGT1003MO Carbide inserts Cutter RCMT1003 Metalworking tool 10pcs
Details:
Processing of copper / aluminum / nonferrous metal products.
The machined parts have better smoothness.
Durable and durable.
Full grinding with a German machine tool, including the bottom, the side, the surface.
High-precision.
Quantity: 10pcs/kit
Package Contents:
10 * Inserts
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Engraving End Mills Replacement Woodworking 10Pcs Carbide Single Flute
Details:
*100% brand new and high quality
*Suitable Materials: Acrylic, PVC, MDF, high-density board, lotus board,
Solid wood, wood, plastic plate, double color sheet, etc.
*Application: Cutting, engraving, slotting, milling, and so on, such as hollow cut
*High precision grind by imported machine tools
*Unique finish polish, sharp cutting edge
*High durability, not easy to break
*Combine single-edge excellent removing and spiral cutting, can greatly increase cutting speed, while ensuring quality
*Size: 3.175*12mm (Approx.)
Package Contents:
10*End Mills
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

10pcs CNC Drill Bit End Mill Carbide Flute Spiral Cutters Engraving Replacement
Details:
*100% brand new and high quality
*Suitable Materials: Acrylic, PVC, MDF, high-density board, lotus board,
Solid wood, wood, plastic plate, double color sheet, etc.
*Application: Cutting, engraving, slotting, milling, and so on, such as hollow cut
*High precision grind by imported machine tools
*Unique finish polish, sharp cutting edge
*High durability, not easy to break
*Combine single-edge excellent removing and spiral cutting, can greatly increase cutting speed, while ensuring quality
*Size: 3.175*12mm (Approx.)
Package Contents:
10*End Mills
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Practical Holder MT2 ER16 50mm M10 Taper Adapter CNC Milling Tool Useful
Features:
This MT2 holder has better cleanness and more stable accuracy.
The surface is quite smooth which offers a comfortable feeling and nice appearance.
Antirust precision ground and hand inspected.
The hardness and endurance of the surface are improved.
It is well packed in a container which will protect holder from damage.
This MT2 holder is suitable for all ER16 collets.
Mainly used on milling machine, drilling machine, lathe, small machine tools.
Specification:
Material: Carbon steel
Type: ER16 MT2 M10
Thread Outer Diameter: M10
Nut Outer Diameter: 28mm
Clamp Capacity: 1mm-10mm
Package Contents:
1 * MT2 Holder
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Lathe Turning Tool Grooving Cut off MGEHR1010-2 Accessory Practical Universal
Details:
High quality and brand new
Model: MGEHR1010-2
Shank Diameter: 10mm
Overall Length: 100mm
Insert: MGMN200
Package Contents:
1 * Holder
1 * Wrench
4 * Insert
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Set End Mill 10PCS Bits Replacement Ball Nose Accessories Professional
Details:
* 10PCS set Carbide Ball Nose End Mill CNC Engraving Cutting, Router bits.
* Chatter resistant design for superior surface finishes and long tool life.
* Sharp cutting reasonable matched with high strength of cutter.
* Arc relief angle makes tool better wear-resistance for wood working
* Suitable for wood, MDF, HDF, solid wood, epoxy board, PVC, plastic
* Flute : 2 Flutes
* Cutting Diameter: d=1 1.5 2 2.5 3.175 MM
* Shank Diameter : D=3.175MM
* Blade length: L1=4 6 8 12 12mm
* Overall length: L=38 MM
* Material : Carbide
* Coating : uncoated
* Quantity: 10Pcs
Package contents:
2Pcs 3.175*1*4*38 Engraving Router bit
2Pcs 3.175*1.5*6*38 Engraving Router bit
2Pcs 3.175*2*8*38 Engraving Router bit
2Pcs 3.175*2.5*12*38 Engraving Router bit
2Pcs 3.175*3.175*12*38 Engraving Router bit
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Set End Mill 1-3.175mm 10PCS Cutting Replacement 2 Flutes Professional
Details:
* 10PCS set Carbide Ball Nose End Mill CNC Engraving Cutting, Router bits.
* Chatter resistant design for superior surface finishes and long tool life.
* Sharp cutting reasonable matched with high strength of cutter.
* Arc relief angle makes tool better wear-resistance for wood working
* Suitable for wood, MDF, HDF, solid wood, epoxy board, PVC, plastic
* Flute : 2 Flutes
* Cutting Diameter: d=1 1.5 2 2.5 3.175 MM
* Shank Diameter : D=3.175MM
* Blade length: L1=4 6 8 12 12mm
* Overall length: L=38 MM
* Material : Carbide
* Coating : uncoated
* Quantity: 10Pcs
Package contents:
2Pcs 3.175*1*4*38 Engraving Router bit
2Pcs 3.175*1.5*6*38 Engraving Router bit
2Pcs 3.175*2*8*38 Engraving Router bit
2Pcs 3.175*2.5*12*38 Engraving Router bit
2Pcs 3.175*3.175*12*38 Engraving Router bit
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

10Pcs Set SP300 NC3020 GTN-3 3mm Grooving Cut-Off Carbide Inserts CNC Use Tool
Features:
Good precision, high toughness and durability.
High hard, wear-resistant, strong shock resistance, thermal cracking, and resistance to deformation.
High cutting efficiency, long service life.
For steel semi-finishing.
High quality and brand new.
Specification:
Model: ZQMX3N11-1E
Material: YBC251
Color: Gold (As Picture Show)
Width: 3mm
Quantity: 10pcs/box
Package Contents:
10 * Cut-Off Grooving Parting Insert
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Black Tool Holder Edge Wrench For VBMT1604 Inserts Lathe Carbon Steel Right
Details:
* This is turning tool holder for holding VBMT1604 insert. (insert is NOT included)
* Made of carbon steel, it is super durable and it has high hardness.
* Model: SVJBR 1616H16
* Material: carbon steel
* Direction: Right Hand
* Tool Cutting edge angle: 93degree
* Square Shank (WxH): 16*16mm(approx)
* Overall length: 100mm(approx)
* Color: Black(as pictures show)
* The insert in picture is NOT included. Only the turning tool holder.
Package contents:
1* SVJBR 1616H16 turning tool holder
1* Wrench
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

4PCS Motorcycle Battery Power Cut Off Switch Terminal Link Disconnect Swtich
Features:
100% brand new and high quality
Made of high-quality materials, durable
Motorcycle battery power off switch
Prevent battery leakage
Exquisite and compact, easy to install and disassemble
Zinc alloy body can extend service life
Application: motorcycle, small battery
Product parameters:
Color: gold and blue
Body size: 63 x 20 mm / 2.48 x 0.79 inches
Screw hole diameter: 6 mm / 0.23 inch
Weight: 40 grams
Rated current: 80A
Material: zinc alloy, plastic, iron
Installation: connect to the negative terminal of the battery
How to use: Unscrew the plastic lip to turn on, and unscrew it to cut off.
The package includes:
4 *Motorcycle battery cut-off switch
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

S12M-SDUCR07 Boring Bar Turning Tool DCMT0702 Carbide Insert Lathe Wrench Kit R1
Features:
User clamping and convenient to replace, only a wrench to complete the replacement of the cutter blade and pad.
High strength and hardness, durable in use.
High grip strength and impact resistance.
Clear speed advantage in cutting off a large margin and processing.
Suitable for semi-finishing, finishing.
High quality and brand new.
Specification:
Model: S12M-SDUCR07
Material: Steel
Blade Shank: 12mm (Approx)
Shank Length: 150 mm (Approx)
Wrench: T8
Accept Inserts: DCMT0702 (10pcs)
Package Contents:
1 * S12M-SDUCR07 Turning Tool Holder
1 * T8 Wrench
10 * DCMT0702 Blade
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

10pcs Tungsten Carbide Inserts TCMT 32.51 For 1/2" Lathe-Turning Tool 21*30cm
Warm Tips: Box colors will be sent at Random, we do not accept the specified color, thanks for your understanding.
Features:
* Blade has high strength and high toughness.
* Stable and durable, long use life.
* Great wear resistance and corrosion resistance.
* Mainly used for steel, stainless steel finishing and semi-finishing rough machining.
Specifications:
* Material: Tungsten Steel
* Color: Gold (As pictures show)
* Shape:Triangular
* Dimension: 16mm * 5mm * 4mm / 0.6 * 0.2 * 0.15 inch
Package contents:
10* Carbide Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Steel Tool Post Holder 42-45 Kit Set Semi-finishing Lathe Practical New
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
SCLCL1010H06 CNC turning tool holder lathe cutter tool wrench 10X CCMT0602 carbide inserts.
Suitable for semi-finishing, finishing
To maintain tight tolerances unmatched performance.
Accessories steel is good, long service life, reducing the user cost of the tool.
High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing.
User clamping and convenient way to replace, only a wrench to complete the replacement of the insert and pad.
Practical and a variety of processing environments, even in very dirty environments such as cast iron also has good features.
Perfect machining effect, perfect surface finish. High tensile strength and anti abrasion finish.
Specification:
Model: SCLCL1010H06
Material: Steel
Hardness: 42-45
Angle: 95 degree
Holder Size: 98 x 10 x 10mm(Approx.)
Insert Size: 6 x 6mm(Approx.)
Wrench Length: 82mm(Approx.)
Accept Inserts: CCMT0602 (10pcs)
Package Contents:
1 x SCLCL1010H06 Holder
10 x CCMT0602 Carbide Inserts
1 x Wrench
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

ER32UM Wrench For Clamping Nut CNC Milling Lathe Precision Wrench High Quality
Details:
*100% Brand new and high quality
*Made of high quality material, more durable.
*ER32UM wrench for clamping nut CNC milling lathe precision wrench
*Standard ER32UM nut wrench
*Color: As Pictures Show
Package Content:
1*Wrench
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your

1XExternal Lathe Turning Holder MCLNR 1616H12 16*100mm Index For CNMG1204 Insert
Details:
Model: MCLNR 1616H12
Material: Carbon Steel
Direction: Right Hand
Tool Cutting Edge Angle: 95°
Square Shank (W*H): 16mm*16mm
Overall Length: 100mm
Package Contents:
1 * External Tool Holder
1 * "L" Type Wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Tungsten Carbide End Mill 4 Flute Shank Drill HRC50 Flat Bottom High Strength
Features:
* Coating with TIALN Can Cutting Harden materiel, 3 times Durable than Carbide.
* Good milling and cutting performance, ensure the high efficiency of the work.
* Sufficient bending strength and wear resistance, the surface is clean, neat and no glitches.
* High strength, resistance to bending, breakage resistance, long service life.
* Suitable for DIY, Home and General Building / Engineering Using.
Specifications:
* Material: Tungsten Carbide
* Highest cutting hardness: HRC50
* Flute: 4
* Total Length: 75mm / 2.95''
* Blade Length: 25mm / 0.98''
* Diameter of Head: 10mm / 0.39''
Package contents:
1* Straight Shank 4 flutes End Mill
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

4 flutes End Mill 75mm Length Flat Bottom HRC50 Useful Accessories High Quality
Features:
* Coating with TIALN Can Cutting Harden materiel, 3 times Durable than Carbide.
* Good milling and cutting performance, ensure the high efficiency of the work.
* Sufficient bending strength and wear resistance, the surface is clean, neat and no glitches.
* High strength, resistance to bending, breakage resistance, long service life.
* Suitable for DIY, Home and General Building / Engineering Using.
Specifications:
* Material: Tungsten Carbide
* Highest cutting hardness: HRC50
* Flute: 4
* Total Length: 75mm / 2.95''
* Blade Length: 25mm / 0.98''
* Diameter of Head: 10mm / 0.39''
Package contents:
1* Straight Shank 4 flutes End Mill
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness