Equipo para trabajar metales

10 X 3.175mm Carbide End Mill Engraving Bits 1-3mm Cutting Edge PCB CNC
Features:
*100% brand new and high quality
*Use of ultra-fine grain carbide material with good milling,cutting performance,ensure high work efficiency
*Have sufficient bending strength and wear resistance
*High hardness,high wear resistance,high strength
*Sharp cutting edge,milling,hole and plate edge,surface clean,neat,no glitches
*Suitable for PCB,CNC,mould,pastic fiber,carbon fiber,super hardwood,printed circuit board,other precision parts processing
Specifications:
*Material: Carbide (tungsten steel)
*Color:As Pictures Show
*Shank Diameter: 3.175mm
*Cutting Edge Diameter: 1/1/1.5/1.5/2/2/2.5/2.5/3/3mm
*Cutting Edge Length: 7/7/8.5/8.5/9.5/9.5/10.5/10.5/12.5/12.5mm
*Overall Length: 38mm
Package Contents:
10 * PCB Drill Bit Engraving Mill Cutter
1 * Box
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow 1-3mm differences due to manual measurement

Lathe Tools Turning 10*125mm T8 Wrench 11NR A60 11IR Internal Threading Boring
Details:
Model:SNR0010K11
Material: Chrome Vanadium
Shank Diameter:10mm
Overall Length:125mm
Direction:Right Hand
Accept Insert:11 NR/11 IR
Wrench Model:T8
Insert:11NR A60/11IR AG60
Package Contents:
1 * Internal Lathe
1 * T8 Wrench
1 * Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

R0.25 End Mill 4mm CEL Carbide 2 Flute Ball Nose CNC Drill Bit Carving Tool
Features:
*100% brand new and high quality
*Adopts high quality imported tungsten steel hard alloy
*Excellent chip removal effect
*High surface finish, excellent work
*Long service life
*Suitable for cutting, end milling, slotting stainless steel, cast iron, copper, aluminum, carbon steel, die steel, hardwood, plywood, conical ball end mill/cone cutter etc
Specifications:
*Model: TC-R0.25* D4*20.5*50L*2F
*Material: Tungsten steel hard alloy
*Number of flutes: 2 Flutes
*Working material HRC: 0~55 degrees
*Radius: 0.25mm(Approx)
*Coating: Tialn
*Shank diameter: 4mm (Approx)
*Cutting length: 20.5mm (Approx)
*Total length: 50mm (Approx)
*Unilateral angle: B = 4.88°
Package Contents:
1*End Mill
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

ER20A Type Clamping Nut Precision Grinding For CNC Milling Lathe Accessories New
Features:
100% Brand New And High Quality
Made Of High-quality Materials, Durable
Hardening And Precision Grinding
High Strength And Hardness
Specifications:
Model: ER20A
Material: Carbon Steel
Size: As Picture Shown
Accessories: CNC Chuck Holder For ER Chuck Milling
Package Contents:
2 *ER20A Type Clamping Nut
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Carbide Inserts Turning Tool Set SNR0010K11 Boring Bar Holder Industrial
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Model: SNR0010K11
* Material: Chrome Vanadium
* Wrench Length: 85 mm(Approx.)
* Boring Bar Size(D x L): 10 x 125mm (Approx.)
* Insert Diameter: 9mm (Outside) / 4mm (Inside)(Approx.)
* Direction: Right Hand
* Accept Insert: 11 NR / 11 IR
* Wrench Specifications: T8
* Insert: 11IR A60
Warm Tips:
* The color of the wrench will be sent randomly
Package Contents:
1 * Boring Bar
1 * Wrench
1 * Insert
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Internal Lathe Turning Tools 11NR AG60 Shank Insert Holder Chrome Pack
Details:
*100% Brand new and high quality
*Made of high quality material, more durable.
*Wrench specification:T8
*Accept Insert : 11 NR
*Model:11NL AG60
*Color: As Pictures Show
*Material:Chrome vanadium
*Dimension: (Approx.)
Shank diameter:10mm
Overall length:125mm
*model:SNR0010K11
Package Contents:
1*Internal Lathe
1*T8 wrench
1*Cutting tools
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

ER20A Type Clamping Nut Collet Collet Chuck Holder Accessories Replacement
Features:
100% Brand New And High Quality
Made Of High-quality Materials, Durable
Hardening And Precision Grinding
High Strength And Hardness
Specifications:
Model: ER20A
Material: Carbon Steel
Size: As Picture Shown
Accessories: CNC Chuck Holder For ER Chuck Milling
Package Contents:
2 *ER20A Type Clamping Nut
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

ER20A Type Clamping Nut Collet For CNC Milling Accessories Replacement
Features:
100% Brand New And High Quality
Made Of High-quality Materials, Durable
Hardening And Precision Grinding
High Strength And Hardness
Specifications:
Model: ER20A
Material: Carbon Steel
Size: As Picture Shown
Accessories: CNC Chuck Holder For ER Chuck Milling
Package Contents:
2 *ER20A Type Clamping Nut
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

2pcs / kit ER20A Type Clamping Nut Collet For CNC Milling Replacement Useful
Features:
100% Brand New And High Quality
Made Of High-quality Materials, Durable
Hardening And Precision Grinding
High Strength And Hardness
Specifications:
Model: ER20A
Material: Carbon Steel
Size: As Picture Shown
Accessories: CNC Chuck Holder For ER Chuck Milling
Package Contents:
2 *ER20A Type Clamping Nut
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

2pcs ER20 A Collet Chuck Nut For CNC Milling Collet Chuck Holder Carbon Steel
Features:
100% Brand New And High Quality
Made Of High-quality Materials, Durable
Hardening And Precision Grinding
High Strength And Hardness
Specifications:
Model: ER20A
Material: Carbon Steel
Size: As Picture Shown
Accessories: CNC Chuck Holder For ER Chuck Milling
Package Contents:
2 *ER20A Type Clamping Nut
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Durable Stainless Steel Thread Repair Insert Set M3 M4 M5 M6 M8 M10 M12 Supplies
Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* 60pcs Stainless Steel Thread Repair Insert Assortments Kit
* Including:
M3*0.5*2D(10pcs)
M4*0.7*2D (10pcs)
M5*0.8*2D (10pcs)
M6*1.0*2D (10pcs)
M8*1.25*2D (10pcs)
M10*1.5*2D (5pcs)
M12*1.75*2D (5pcs)
Package Contents:
60pcs/Set Thread Repair Kit
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Holder Turning Tool For TCMT110204 Lathe S12M-STUCR11 12mm*150mm Portable
Details:
Model: S12M-STUCR11
Material: Carbon Steel
Direction: Right hand
Tool Cutting Edge Angle: 93°
Shank Diameter: 12mm
Overall Length: 150mm
Wrench: T8
Screw: M2.5*6
Suitable Inserts: TCMT110204(TCMT21.51),TCGT110204(TCGT21.51) (inserts not included)
Package Contents:
1 * Holder
1 * Wrench
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2pcs Carbide 4-Flutes Long Series Endmill TiAlN Coated End Mills 6mm Shank Pack
Features:
Solid Carbide 4 Flute 6mm Shank Dia End Mill Router Bits Woodworking Accessory
High quality material, high strength, sturdy and durable
Widely used for die steel, hardened material, steel, acrylic, PVC, plastic, etc
Suitable for DIY home and general construction and engineering
Specifications:
Flute: 4 flutes
Material: Solid carbide tungsten carbide
Coating: titanium aluminum nitride
Cutting diameter: approx. 6MM
Shank diameter: approx. 6MM
Flute length: approx. 15MM
Total length: approx. 50MM
Suitable for material hardness: HRC45
Package Contents:
2 * End Mill
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2Pcs 4 Flute Milling Drill Bit Cutter Carbide End Mill CNC Engineering Tools 6mm
Features:
Solid Carbide 4 Flute 6mm Shank Dia End Mill Router Bits Woodworking Accessory
High quality material, high strength, sturdy and durable
Widely used for die steel, hardened material, steel, acrylic, PVC, plastic, etc
Suitable for DIY home and general construction and engineering
Specifications:
Flute: 4 flutes
Material: Solid carbide tungsten carbide
Coating: titanium aluminum nitride
Cutting diameter: approx. 6MM
Shank diameter: approx. 6MM
Flute length: approx. 15MM
Total length: approx. 50MM
Suitable for material hardness: HRC45
Package Contents:
2 * End Mill
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

M2.5x6 Turning Tool Holder Metalworking Lathe 300RC10-10x120-1T Wrench
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Lathe BAP300R C10-10 X 120-1T Boring Bar APMT1135PDER Insert Wrench
* Please note that the color of the wrench will be sent randomly
* Model: 300RC10-10x120-1T
* Material: Alloy Steel
* Calf Dia: 10 mm(Approx.)
* Total Length: 120 mm(Approx.)
* Color: As pictures show
* Wrench: T8 Screw: M2.5x6
* Insert: APMT1135PDER
* Direction: Right Hand
Package Contents:
1*Boring Bar
1*Insert
1*Wrench
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Bar Internal Lathe Tools AG60 Shank Insert Holder Chrome Threading Boring
Details:
*100% Brand new and high quality
*Made of high quality material, more durable.
*Wrench specification:T8
*Accept Insert : 11 NR
*Model:11NL AG60
*Color: As Pictures Show
*Material:Chrome vanadium
*Dimension: (Approx.)
Shank diameter:10mm
Overall length:125mm
*model:SNR0010K11
Package Contents:
1*Internal Lathe
1*T8 wrench
1*Cutting tools
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Details:
100% High quality and brand new.
Product Name: External Turning Tool Holder
Model: SVVCN1212H11
Lead Angle: 35°
Direction: Right Hand
Accept Inserts: VBMT1103 VCMT1103 VCGT11 ......
Material: Alloy Steel
Color: Black (As Picture Show)
Shank Diameter: 12mm
Overall Length: 100mm
Package Contents:
1 * SVVCN1212H11 Turning Tool Holder
1 * Wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

1pc Type A Motor Shaft Collet 6mm Extension Rod Chuck Tools Holder CNC Milling
Features:
*100% brand new and high quality
*ER straight rod type collet extension handle, the handle body is relatively long, suitable for deep hole processing
*Used for motor Rod Extension,can replace the drill clip,with ER collet perfect match for all kinds of straight shank tools
*The outer diameter of the rod and other parts of the rod can be eliminated by precision grinding, which can eliminate the unbalance and increase the stability of the cutting
Specifications:
*Material: 40CR
*Color: Silver & Black
*Suitable Chuck: ER16
*Nut Type: Type A
*Rod Hole Diameter: 6mm (Approx.)
*Rod Diameter: 25mm (Approx.)
*Size: 38.6*25mm/1.51*0.98inch (Approx.)
Package Contents:
1*Motor Shaft Collet
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

SCMCN1212H09 12x100mm Lathe Turning Tool Holder 1x Wrench For CCMT09T3 Inserts
Features:
To maintain tight tolerances unmatched performance.
Accessories steel is good, long life, reducing the user cost of the tool.
High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing.
User clamping and convenient way to replace, only a wrench to complete the replacement of the knife blade and pad.
Practical and a variety of processing environments, even in very dirty environments such as cast iron also has good features.
Specification:
Model: SCMCN1212H09
Shank Square Diameter: 12*12 mm
Shank Length: 100 mm
Wrench : T15
Inserts Material: Steel
Accept Inserts: CCMT09T3(Not Included)
Suitable For: Semi-finishing, finishing
Package Contents:
1 * SCMCN1212H09 Holder
1 * Red Wrench
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Features:
*100% brand new and high quality
*ER straight rod type collet extension handle, the handle body is relatively long, suitable for deep hole processing
*Used for motor Rod Extension,can replace the drill clip,with ER collet perfect match for all kinds of straight shank tools
*The outer diameter of the rod and other parts of the rod can be eliminated by precision grinding, which can eliminate the unbalance and increase the stability of the cutting
Specifications:
*Material: 40CR
*Color: Silver & Black
*Suitable Chuck: ER16
*Nut Type: Type A
*Rod Hole Diameter: 6mm (Approx.)
*Rod Diameter: 25mm (Approx.)
*Size: 38.6*25mm/1.51*0.98inch (Approx.)
Package Contents:
1*Motor Shaft Collet
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1set Left Hand SNL0012K11 Inner Threading Turning Tool Boring Bar Holder With T8
Item Details:
*Left Hand SNL0012K11 150mm Inner Threading Turning Tool Boring Bar Holder Wrench
*Applied in the a variety of processing environments, even in dirty environment such as cast iron
*Fits for semi-finishing and finishing
*Made of high quality material, high grip strength, impact resistance and strong speed advantage in cutting off a large margin and processing
*To maintain tight tolerances unmatched performance
*100% brand new and high quality
*Color: As Pictures Show
*Holder Model: SNL0012K11
*Direction:Left Hand
*Wrench: T8
*Holder Dimension: 12x150mm (Approx.)
Package Contents:
1*SNL0012K11 Inner Threading Tool Holder
1*T8 Wrench
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Tool kit 12x150mm Wrench Left Hand Inner Threading Hot Sale Universal
Item Details:
*Left Hand SNL0012K11 150mm Inner Threading Turning Tool Boring Bar Holder Wrench
*Applied in the a variety of processing environments, even in dirty environment such as cast iron
*Fits for semi-finishing and finishing
*Made of high quality material, high grip strength, impact resistance and strong speed advantage in cutting off a large margin and processing
*To maintain tight tolerances unmatched performance
*100% brand new and high quality
*Color: As Pictures Show
*Holder Model: SNL0012K11
*Direction:Left Hand
*Wrench: T8
*Holder Dimension: 12x150mm (Approx.)
Package Contents:
1*SNL0012K11 Inner Threading Tool Holder
1*T8 Wrench
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Left Hand Tool Kit Inner Threading Turning Tool Boring Bar Holder High Quality
Item Details:
*Left Hand SNL0012K11 150mm Inner Threading Turning Tool Boring Bar Holder Wrench
*Applied in the a variety of processing environments, even in dirty environment such as cast iron
*Fits for semi-finishing and finishing
*Made of high quality material, high grip strength, impact resistance and strong speed advantage in cutting off a large margin and processing
*To maintain tight tolerances unmatched performance
*100% brand new and high quality
*Color: As Pictures Show
*Holder Model: SNL0012K11
*Direction:Left Hand
*Wrench: T8
*Holder Dimension: 12x150mm (Approx.)
Package Contents:
1*SNL0012K11 Inner Threading Tool Holder
1*T8 Wrench
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

SNL0012K11 150mm Threading Turning Tool Boring Bar Holder T8 Wrench Kit Set
Item Details:
*Left Hand SNL0012K11 150mm Inner Threading Turning Tool Boring Bar Holder Wrench
*Applied in the a variety of processing environments, even in dirty environment such as cast iron
*Fits for semi-finishing and finishing
*Made of high quality material, high grip strength, impact resistance and strong speed advantage in cutting off a large margin and processing
*To maintain tight tolerances unmatched performance
*100% brand new and high quality
*Color: As Pictures Show
*Holder Model: SNL0012K11
*Direction:Left Hand
*Wrench: T8
*Holder Dimension: 12x150mm (Approx.)
Package Contents:
1*SNL0012K11 Inner Threading Tool Holder
1*T8 Wrench
Notes:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Carbide Ball New Cutter Shank Flute Pcb 10pcs/set Nose Mill Cnc 10x End 3.175mm
Welcom to our store : shoppingfromeast
Features:
*100% brand new and high quality
*Made of high quality tungsten steel material,strong hardness and very durable
*Can be used to engrave Wood,ABS,Acrylic,PVC,Nylon,Resin,Majority of plastics
Specifications:
* Material:Tungsten Steel
* Color:As Pictures Show
* Cutting Diameter:3.175mm(1/8'')
* Shank Diameter:3.175mm(1/8'')
* Cutting Edge Length(Flute Length):22mm
* Total Length:38mm
* Number of Flutes:2
* End Design:Ball Nose
Package Contents:
10 * Ball Nose End Mill
1 * Box
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow 1-2mm errors due to manual measurement,thank you.

6Pcs 3 Flute HSS Countersink Chamfer End Mill Drill Bits Cutting Tool Useful HOT
Features:
Natural color three edge mill cutter
It is suitable for use in the work-piece which the hardness is under 25 degrees,
Such as aluminum sheet, thin iron plate, the insulating board or PVC board
It's very sharp and durable,you use it for a long time.
Specification:
Size:
6.3mm: Head diameter 6.3mm, shank diameter 5mm, total length 37mm;
8.3mm: Head diameter 8.3mm, shank diameter 6mm, total length 40mm;
10.4mm: Head diameter 10.4mm, shank diameter 6mm, total length 39mm;
12.4mm: Head diameter 12.4mm, shank diameter 10mm, total length 46mm;
16.5mm: Head diameter 16.5mm, shank diameter 10mm, total length 47mm;
20.5mm: Head diameter 20.5mm, shank diameter 10mm, total length 47mm;
Material: HSS(high speed steel)
Quantity: 6pcs/kit
Package Contents:
6 * Drill Bits
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

Set Thread Repair Kit Screw Hand tool Spiral Fitting Insert Kit Supplies
Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* 60pcs Stainless Steel Thread Repair Insert Assortments Kit
* Including:
M3*0.5*2D(10pcs)
M4*0.7*2D (10pcs)
M5*0.8*2D (10pcs)
M6*1.0*2D (10pcs)
M8*1.25*2D (10pcs)
M10*1.5*2D (5pcs)
M12*1.75*2D (5pcs)
Package Contents:
60pcs/Set Thread Repair Kit
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

60pcs/set M3-m12 Stainless Steel Thread Repair Assortment Kit Tools Accessory
Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* 60pcs Stainless Steel Thread Repair Insert Assortments Kit
* Including:
M3*0.5*2D(10pcs)
M4*0.7*2D (10pcs)
M5*0.8*2D (10pcs)
M6*1.0*2D (10pcs)
M8*1.25*2D (10pcs)
M10*1.5*2D (5pcs)
M12*1.75*2D (5pcs)
Package Contents:
60pcs/Set Thread Repair Kit
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Metalworking Carbide Inserts CCMT 09 T3 CCMT32.51 CCMT09T304 VP15TF Supplies
Features:
Durable, good wear resistance.
For high hardness materials and cast iron.
Metal surface finishing, good wear resistance.
High quality and brand new.
Specification:
Model: CCMT09T304 VP15TF
Material: Metal Ceramics
Size: 14mm
Suitable For: Normal processing stainless steel and ordinary, such as steel 45 steel,　A3 steel, stainless steel and other soft materials 201,　304, etc.
Package Contents:
10 * Carbide Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Pack Of 10 CCMT09T304 VP15TF Carbide Inserts CCMT 09 T3 / CCMT32.51 Insert Newly
Features:
Durable, good wear resistance.
For high hardness materials and cast iron.
Metal surface finishing, good wear resistance.
High quality and brand new.
Specification:
Model: CCMT09T304 VP15TF
Material: Metal Ceramics
Size: 14mm
Suitable For: Normal processing stainless steel and ordinary, such as steel 45 steel,　A3 steel, stainless steel and other soft materials 201,　304, etc.
Package Contents:
10 * Carbide Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

SNR0010K11,Internal Lathe Threading Turning Tools Boring Holder&Carbide Insert
Details:
*100% Brand new and high quality
*Made of high quality material, more durable.
*Wrench specification:T8
*Accept Insert : 11 NR
*Model:11NL AG60
*Color: As Pictures Show
*Material:Chrome vanadium
*Dimension: (Approx.)
Shank diameter:10mm
Overall length:125mm
*model:SNR0010K11
Package Contents:
1*Internal Lathe
1*T8 wrench
1*Cutting tools
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

2*Solid Carbide 4Flute Long Series Endmill TiAlN Coated End Mill Sizes 6mm Shank
Features:
Solid Carbide 4 Flute 6mm Shank Dia End Mill Router Bits Woodworking Accessory
High quality material, high strength, sturdy and durable
Widely used for die steel, hardened material, steel, acrylic, PVC, plastic, etc
Suitable for DIY home and general construction and engineering
Specifications:
Flute: 4 flutes
Material: Solid carbide tungsten carbide
Coating: titanium aluminum nitride
Cutting diameter: approx. 6MM
Shank diameter: approx. 6MM
Flute length: approx. 15MM
Total length: approx. 50MM
Suitable for material hardness: HRC45
Package Contents:
2 * End Mill
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

HRC45 4 Flute 6mm Shank Dia End Mill Router Bits Drilling Woodworking Accessory
Features:
Solid Carbide 4 Flute 6mm Shank Dia End Mill Router Bits Woodworking Accessory
High quality material, high strength, sturdy and durable
Widely used for die steel, hardened material, steel, acrylic, PVC, plastic, etc
Suitable for DIY home and general construction and engineering
Specifications:
Flute: 4 flutes
Material: Solid carbide tungsten carbide
Coating: titanium aluminum nitride
Cutting diameter: approx. 6MM
Shank diameter: approx. 6MM
Flute length: approx. 15MM
Total length: approx. 50MM
Suitable for material hardness: HRC45
Package Contents:
2 * End Mill
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Solid Carbide 4 Flute Shank Dia End Mill Router Bits Woodworking Accessory New
Features:
Solid Carbide 4 Flute 6mm Shank Dia End Mill Router Bits Woodworking Accessory
High quality material, high strength, sturdy and durable
Widely used for die steel, hardened material, steel, acrylic, PVC, plastic, etc
Suitable for DIY home and general construction and engineering
Specifications:
Flute: 4 flutes
Material: Solid carbide tungsten carbide
Coating: titanium aluminum nitride
Cutting diameter: approx. 6MM
Shank diameter: approx. 6MM
Flute length: approx. 15MM
Total length: approx. 50MM
Suitable for material hardness: HRC45
Package Contents:
2 * End Mill
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

SNR0010K11,Internal Lathe Threading Turning Tool Boring Holder Carbide Insert Uk
Details:
*100% Brand new and high quality
*Made of high quality material, more durable.
*Wrench specification:T8
*Accept Insert : 11 NR
*Model:11NL AG60
*Color: As Pictures Show
*Material:Chrome vanadium
*Dimension: (Approx.)
Shank diameter:10mm
Overall length:125mm
*model:SNR0010K11
Package Contents:
1*Internal Lathe
1*T8 wrench
1*Cutting tools
Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

20mm Cutting Dia 6mm Depth 6 Flutes HSS T Slot End Mill Milling Cutter 90mm Long
Specification:
*100% brand new high quality
*Made of high-quality materials, durable
*Product name: T-type milling cutter
*Material: HSS
*Long blade: 6 blades
*Color: silver gray
*Cutting diameter: 20mm / 0.8"
*Cutting depth: 6mm / 0.24"
*Handle diameter: 12mm / 0.47"
*Total length: 90mm / 3.5 inches
*Weight: 90g
*Straight shank, 6-blade, T-slot, high-speed steel
*Widely used for milling steel, aluminum, copper and iron
Package Contents:
1 * T type milling cutter
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Accessories Carbide Inserts Replaces Set Kit For MGEHR/MGIVR Professional
Details:
* These carbide inserts are used for machining steel and cast iron,processing soft and soft stainless steel and aluminum line.
* Golden KDC material.
* Fit for: MGEHR/MGIVR Grooving Cut-Off Tool
* Model: MGMN200-G
* Material: metal( KDC material)
* Quantity: 10pcs
* Dimensions: approx. 16*3*2mm(L*W*H)
Package contents:
10* Carbide Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Accessories Carbide Inserts Replaces Pack Kit For MGEHR/MGIVR Professional
Details:
* These carbide inserts are used for machining steel and cast iron,processing soft and soft stainless steel and aluminum line.
* Golden KDC material.
* Fit for: MGEHR/MGIVR Grooving Cut-Off Tool
* Model: MGMN200-G
* Material: metal( KDC material)
* Quantity: 10pcs
* Dimensions: approx. 16*3*2mm(L*W*H)
Package contents:
10* Carbide Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

S12M-SDUCR07 Turning Tool Holder Boring Bar Carbide Insert Wrench Replacement
Item Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*High wear resistance and high hardness processing, with very good wear resistance
*This product can reduce processing costs and improve efficiency
*The main body and other parts are all precision ground to eliminate the imbalance.
*Improve safety when cutting. For heavy cutting, high rotation and feed rate
*Applicable to: semi-finishing, finishing
*Material: Stainless Steel
*Model: S12M-SDUCR07
*Full Length: 150mm / 6 Inches(Approx.)
Package Contents:
1 * S12M-SDUCR07 Tool Holder
1 * Wrench
1 * Insert
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Accessories Carbide Inserts Replaces Set Pack For MGEHR/MGIVR Professional
Details:
* These carbide inserts are used for machining steel and cast iron,processing soft and soft stainless steel and aluminum line.
* Golden KDC material.
* Fit for: MGEHR/MGIVR Grooving Cut-Off Tool
* Model: MGMN200-G
* Material: metal( KDC material)
* Quantity: 10pcs
* Dimensions: approx. 16*3*2mm(L*W*H)
Package contents:
10* Carbide Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness

Tungsten End Mill Carbide Length 15mm For Stainless Steel 6mm 4F End Mill Cutter
Item Details:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* It can roughen and finish the heat-treated materials below 65 degrees, which reduces the number of tool changes. Improves machine tool productivity. Saves production time
* 6mm HRC65 ° 4F nano tungsten carbide end mill for stainless steel
* Flute Length: 15mm(Approx.)
* Color: As pictures show
* Quantity: 1
Package Contents:
1*End Mill
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x CCMT09T304 VP15TF Carbide Inserts Lathe CNC Blade Tool CCMT32.51 W/ Box Set
Features:
Durable, good wear resistance.
For high hardness materials and cast iron.
Metal surface finishing, good wear resistance.
High quality and brand new.
Specification:
Model: CCMT09T304 VP15TF
Material: Metal Ceramics
Size: 14mm
Suitable For: Normal processing stainless steel and ordinary, such as steel 45 steel,　A3 steel, stainless steel and other soft materials 201,　304, etc.
Package Contents:
10 * Carbide Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Carbide Inserts CCMT 09 T3 CCMT32.51 Metalworking CCMT09T304 VP15TF Tool Holder
Features:
Durable, good wear resistance.
For high hardness materials and cast iron.
Metal surface finishing, good wear resistance.
High quality and brand new.
Specification:
Model: CCMT09T304 VP15TF
Material: Metal Ceramics
Size: 14mm
Suitable For: Normal processing stainless steel and ordinary, such as steel 45 steel,　A3 steel, stainless steel and other soft materials 201,　304, etc.
Package Contents:
10 * Carbide Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Item Details:
*ER25UM Collet Chuck Spanner Wrench For Spring Clamping Nut CNC Tool Holder
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*ER25UM spring clamping nut CNC tool holder chuck wrench
*Model: ER25 UM
*Material: high quality steel
*Length: 210mm(Approx.)
Package Contents:
1*ER25UM Wrench
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Fiber optic electrodes For INNO IFS-15 IFS-15H IFS-10 View3/5/7 Fusion Splicer
Product description:
100% brand new and high quality
Made of high-quality materials, durable
This rod is suitable for IFS-10, IFS-15 and IFS-15H.
View3,View5,View7
Number of discharges: 3000 times
Installation and maintenance
Electrode replacement method:
First of all, it is necessary to confirm that the welding machine is in a shutdown state,
Remove the protective cover of the electrode chamber and loosen
Fix the upper electrode and take out the upper Electrode. Then loosen the top
Wire the lower electrode and take out the lower Electrode.
Second, install new electrodes. The operation steps are reverse to the following methods
Disassemble the Electrode. You can operate in sequence. The difference between the two
The two electrode tips are required to be 2.6 /- 0.2 mm.
Finally, during the assembly process, do not touch the electrode tip
Prevent electrode damage, avoid electrode damage
Fall into the machine. After replacing the electrode, the arc position should be
Calibrated.
Electrode cleaning and arc calibration:
After installing the electrodes, turn on the power switch of the welder.
Carry out.
After the welder enters the initial screen, press the menu key to enter the first
Level menu.
Find the machine maintenance personnel by moving the cursor and enter the cleaning electrode
Items, after confirmation, the machine will automatically discharge cleaning and aging
Electrode.
Install the cut left/right fiber, find the arc position item by moving the fiber
Cursor and keep the position between three points and a single line optical
The tip of the fiber and the two electrodes pass the operation. The discharge test will be
It is carried out by the machine and can be adjusted according to the actual situation.
Finally, press the menu key and exit in turn.
Package list:
1 pair of fiber optic electrodes
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Product description:
100% brand new and high quality
Made of high-quality materials, durable
This rod is suitable for IFS-10, IFS-15 and IFS-15H.
View3,View5,View7
Number of discharges: 3000 times
Installation and maintenance
Electrode replacement method:
First of all, it is necessary to confirm that the welding machine is in a shutdown state,
Remove the protective cover of the electrode chamber and loosen
Fix the upper electrode and take out the upper Electrode. Then loosen the top
Wire the lower electrode and take out the lower Electrode.
Second, install new electrodes. The operation steps are reverse to the following methods
Disassemble the Electrode. You can operate in sequence. The difference between the two
The two electrode tips are required to be 2.6 /- 0.2 mm.
Finally, during the assembly process, do not touch the electrode tip
Prevent electrode damage, avoid electrode damage
Fall into the machine. After replacing the electrode, the arc position should be
Calibrated.
Electrode cleaning and arc calibration:
After installing the electrodes, turn on the power switch of the welder.
Carry out.
After the welder enters the initial screen, press the menu key to enter the first
Level menu.
Find the machine maintenance personnel by moving the cursor and enter the cleaning electrode
Items, after confirmation, the machine will automatically discharge cleaning and aging
Electrode.
Install the cut left/right fiber, find the arc position item by moving the fiber
Cursor and keep the position between three points and a single line optical
The tip of the fiber and the two electrodes pass the operation. The discharge test will be
It is carried out by the machine and can be adjusted according to the actual situation.
Finally, press the menu key and exit in turn.
Package list:
1 pair of fiber optic electrodes
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

Features:
Natural color three edge mill cutter
It is suitable for use in the work-piece which the hardness is under 25 degrees,
Such as aluminum sheet, thin iron plate, the insulating board or PVC board
It's very sharp and durable,you use it for a long time.
Specification:
Size:
6.3mm: Head diameter 6.3mm, shank diameter 5mm, total length 37mm;
8.3mm: Head diameter 8.3mm, shank diameter 6mm, total length 40mm;
10.4mm: Head diameter 10.4mm, shank diameter 6mm, total length 39mm;
12.4mm: Head diameter 12.4mm, shank diameter 10mm, total length 46mm;
16.5mm: Head diameter 16.5mm, shank diameter 10mm, total length 47mm;
20.5mm: Head diameter 20.5mm, shank diameter 10mm, total length 47mm;
Material: HSS(high speed steel)
Quantity: 6pcs/kit
Package Contents:
6 * Drill Bits
Notes:
1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2,Please allow slight manual measurement deviation for the data.

1/8 10 Pcs Carbide CNC Four 4 Flute Spiral Bit End Mill Cutter Straight Shank
Details:
Made from high quality carbide for a precise, easy cutting experience.
Suitable for Acrylic, PVC and hard wood.
Material:Carbide
Color:Silver (As Picture Show)
Shank Diameter: 3.175mm
Blade Diameter: 3.175mm
Blade Length: 15mm
Overall Length: 39mm (Approx)
Application: Acrylic, PVC, hard wood
Quantity: 10pcs/kit
Dimension:3.2 * 39mm/0.13 * 1.54 inch(Dia x L)
Package Contents:
10 * Carbide CNC Four 4 Flute Spiral Bit End Mill Cutter
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Carbide Inserts Professional Fitting For MGEHR/MGIVR Grooving Universal
Details:
10PCS MGMN300-M PC9030 3mm Carbide Insert
Fit for MGEHR/MGIVR Grooving Cut-off Tool
High quality and brand new
Package Contents:
10 * Carbide Inserts
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Turning Tool Holder Lathe Cutter External Grooving Metalworking Useful
Item Details:
*100% Brand new and high quality
*Made of high-quality materials, durable and practical
*High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing
*Maintain tight tolerances unmatched performance
*A variety of practical processing environments, even in very dirty environments such as cast iron also has good features
*Convenient to replace, only one wrench is needed to replace and pads
*Good accessories steel, long life, reducing user's cost of the tool
*Model: MGEHR1212-2
*Full length: 100mm / 4 inches
*Color: As Pictures Show
Package Contents:
1*Turning Tool Holder
1*L Wrench
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.